PROLIGHTS EclCyclorama 100

Key Features
  • RGB + warm white colour systems allows high quality of whites (CRI 93 @3,200K) and bright colours
  • Slim design, with only 12 cm height for easy implementation in the front or at the back of the stage
  • Wide asymmetric beam angle to allow flexible installation at modular distances between fixtures
Product Code:
PROECLCYC100

Or call us today on+44 (0)1494 446000

Key Features
  • RGB + warm white colour systems allows high quality of whites (CRI 93 @3,200K) and bright colours
  • Slim design, with only 12 cm height for easy implementation in the front or at the back of the stage
  • Wide asymmetric beam angle to allow flexible installation at modular distances between fixtures

The PROLIGHTS EclCyclorama 100 is a 330W soft-edge, linear cyclorama and floodlight in a surprisingly low profile form factor with RGB + warm white colour mixing.

The fixture is equipped with a custom and calibrated RGB + warm white LED source, capable of delivering a linear and high quality reproduction of the entire spectrum with high CRI, TLCI and TM30 performances.

The optical system has been designed to offer a very wide asymmetric beam angle, and is capable of a superior lumen efficiency. This makes the PROLIGHTS EclCyclorama range a very flexible solution, suitable for applications where fixtures are either connected to each other or separated by a considerable distance, with no dark-edge or uniformity gaps.

The fixture is extremely user friendly and offers a multitude of control possibilities, those being DMX, RDM, Artnet and Wireless DMX.

Light Source

  • Source: 330W RGB + warm white
  • Luminous flux: (with 80°x40° filter on board) 27,342lm @full
  • Lux: @1m to wall and 1.5m height @ full (with standard filter 80°x40°) 1,240 lx – (with 40° filter) 2,610 lx – (with 10°x60° filter) 3,110 lx – (with 30°x60° filter) 2,880lx
  • CRI: 93 @ 3,200K; 92.6@ 5,600K
  • R9: 88 @ 3,200K; 93.7@ 5,600K
  • TLCI: 91 @ 5,600K
  • TM30 Rf: 89.8 @ 5,600K
  • TM30 Rg: 106 @ 5,600K
  • Source life expectancy: > 50,000 hr

 

Optics

  • Beam angle: (HxV) 80°x40°
  • Additional optics: see available accessories

 

Colour System

  • Colour mixing: RGB + warm white
  • CTC: CTC control, + / – green correction, tungsten emulation
  • White presets: 2,800 K – 6,500K
  • Colour wheel: virtual colour wheel with macros

 

Dynamic Effects

  • Control resolution: 16bit dimmer, colours
  • Special features: linear crossfade channel from any white to any colour; virtual CTO on colours

 

Body

  • Hardware on-board: sockets for Quick-Lock Omega bracket (clamp not included)
  • Body: sturdy die-cast aluminium body
  • Body colour: black
  • Other: +/- 8° angle adjusting

 

Control

  • Protocols: DMX512, RDM, Art-Net, W-DMX
  • W-DMX: included, wireless solution receiver
  • RDM: RDM ready for remote monitoring and settings
  • Display: graphic user interface
  • Firmware upgrade: yes, via USB – DMX interface (UPBOX1) not included

 

Electronics

  • Dimmer curves: selectable dimming modes available
  • Strobe / shutter: 1 – 30Hz, electronic
  • Display battery: self-charging battery backup
  • Operating temperature: -10° ~ +45°
  • LED Control: flicker free frequency with adjustable PWM
  • Selectable PWM: 600 ~ 25,000Hz

 

Electrical

  • Mains power supply: 100-240 V – 50/60Hz
  • Max power consumption: 400W
  • Power factor: >0.94

 

Physical

  • Cooling: heat sink without fan
  • Suspension and fixing: any position with quick-lock omega brackets
  • Signal connection: Amphenol XLR 5p IN/OUT connectors
  • Data connection: RJ45 IN/OUT
  • Power connection: Seetronic powerCON waterproof IN/OUT connectors
  • IP rating: IP20
  • Dimensions (WxHxD): 1000x119x148mm / 39.37″x4.69″x5.83″
  • Weight: 9.6kg / 21.16lbs