PROLIGHTS Smart BatPlusG2
The Smart BatPlusG2 is a high-end version of the iconic Smart Bat uplighters designed with enhanced output and battery performance, IP65 with a stunning new look.
PROLIGHTS Smart BatPlusG2
The Smart BatPlusG2’s clever mechanical design allows to turn the unit from an uplighter into a spotlight, by using the suspension or floor bracket, without compromising the aesthetics of the fixture.
The four RGB + Warm White LEDs produce incredibly high-quality white tones (CRI>93) and twice the brightness when operating with the built-in battery (three times when connected to the mains). The beam angle is adjusted with multiple magnetic holographic filters.
The G2 introduces new features such as interchangeable batteries, as well as easy covers with multiple colours, allowing to change its looks as desired.
The PROLIGHTS Smart BatPlusG2 is extremely user-friendly, and it can be used wirelessly with a built-in battery, CRMX/W-DMX and RDM control, or also wired through the PSU and XLR connectors (bypassing the battery).
PROLIGHTS Smart BatPlusG2 Light Source
- Source: 4x20W RGB + Warm White LED
- Luminous flux: 3’102lm @full
- Lux: 1’723lx @5 m without filter
- CRI: 94 @3.200 K; 92 @5.600 K
- R9: 96 @3.200 K; 96 @5.600 K
- TLCI: 92 @5.600 K
- TM30 Rf: 93 @3.200 K; 91 @5.600 K
- TM30 Rg: 105 @3.200 K; 106 @5.600 K
- Source life expectancy: > 50.000 h
Optics
- Beam angle: 12°
- Field angle: 21°
- Additional optics: filters to achieve 20°, 40°, 60°, 10°x60°
Colour System
- Colour mixing: RGBW / FC
- CCT: CCT control through dedicated DMX channel
- White presets: 2’800K – 10’000K
- Colour wheel: virtual colour wheel with macros
- Macros: built-in white presets
Dynamic Effects
- Control Resolution: 16-bit dimmer, colours
- Static mode: selection of static colour
- Manual mode: manual adjustment of colour
- Auto mode: built-in programs with execution speed adjustment
Body
- Body: sturdy die-cast aluminium body
- Body colour: RAL 9004
- Other: Quick release foot to achieve 20° adjustable tilt
Control
- Protocols: CRMX+W-DMX, DMX512, RDM
- Wireless Control: included, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
- RDM: RDM for remote monitoring and settings
- Display: Graphic User Interface
- Firmware upgrade: yes, via USB – DMX interface (UPBOX1) not included
- IR: infrared sensor controlled by remote
- Master/Slave: for synchronised operation of more units linked in a chain
- Other: Possible to switch OFF battery recharge through AC, 16bit control of dimmer and colour
Electronics
- Dimmer: linear 0 ~ 100% electronic dimmer
- Dimmer curves: 4 selectable dimming modes available
- Strobe / shutter: 1 – 30 Hz, electronic
- Operating temperature: 0° ~ +45°
- LED Control: flicker free operation
- Selectable PWM: 600 ~ 25.000 Hz
Electrical
- Mains power supply: 100-240V – 50/60Hz
- Max power consumption: 80W
- Power factor: >0,98
Battery
- Battery: 16,8V lithium
- Estimated battery life: Selectable 3h / 6h / 8h / 12h / 16h / 20h
- Re-charge connection: Battery Pack fast-charge in Case
- Re-charge time: 5h/max
- Battery status: shown on display
- Other: Operation in main power without affecting battery through software battery management and charging operation in case through the quick charger connector
Physical
- IP rating: 65 for temporary outdoor application, not for fixed installations
- Cooling: passive cooling and fan-free
- Suspension and fixing: bracket for hanging and positioning
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
- Dimensions (WxHxD): 257x278x209mm / 10.12”x10.94”x8.23”
- Weight: 6kg / 13.23lbs
Arrange a Demo
If you’re interested in finding out more about any of our Lights, arrange a demo or email us
Additional Reading
Lighting News – Keep up to date with new Lighting products, interviews, press releases and much more!
