PROLIGHTS Video SigmaPix 39T1X2

PROLIGHTS SigmaPix 39T 1X2

This series is available in both 50x50cm and 50x100cm tiles, mechanically compatible in order to assemble a large surface of the screen in a shorter time.
The mechanical design of the tiles has been conceived to allow fast single person installation with an automatic lock design and extra safety & handling features such as flip corner shield and bottom protection. Panel maintenance has been furtherly enhanced allowing quick replacement of LED modules and the PSU unit.

SigmaPix 39T tiles have on board curve mechanics allowing both concave and convex precise installation of  +10° / -10° each tile and the weight has been reduced down to 8,6 kg (50×50) / 14,6 kg (50×100)  per panels (34,4 /29,2 kg per sqm).

SigmaPix 39T is truly creative and it is enriched by the special  C tiles, a special 90° cutted edge panel on every side allowing to create 90° seamless corner on every edge.
The on-board electronics include the latest generation of Novastar A8s receiver card and refresh rate up to 3.840 Hz.

Features

• Outdoor Black LEDs
• Single-person installation, auto lock design, scratch protection and flip-corner shield
• Fast LED Module and PSU replacement
• Built in curve mechanics for +10° / -10° concave & convex
• Special C (90° corner) cabinet for unprecedented design
• Refresh rate of 3.840 Hz

Video

• Driver chip type: MBI 5253
• LED source: Nationstar SMD1921 full black
• Pixel pitch: 3.9mm / 0.15”
• Panel resolution: 128x128pixels
• Module resolution: 64x64pixels
• Luminous flux: 3.500nit
• Contrast: 6.000:1
• Grayscale: 14 bit
• Refresh rate ≥: 3.840Hz
• Drive Mode: 1/16 scan, constan current
• Vertical viewing angle: 120°
• Horizontal viewing angle: 140°
• LED density: 65.536LED/sqm
• Dead Pixel Ratio: <0.002
• LED avg life span: 100.000