PROLIGHTS EclProfile CT+

Key Features
  • Linear white CCT from 2,800K to 10,000K with CRI up to 97
  • RGB / CMY / HSI 3 ch colours control of the six colours LED array
  • Industry standard colour gels matching, tungsten emulation on dimming, tint control (+/- green)

Or call us today on+44 (0)1494 446000

Key Features
  • Linear white CCT from 2,800K to 10,000K with CRI up to 97
  • RGB / CMY / HSI 3 ch colours control of the six colours LED array
  • Industry standard colour gels matching, tungsten emulation on dimming, tint control (+/- green)

The PROLIGHTS EclProfile CT+ is a high quality, six colour mixing LED ellipsoidal that is designed to reach the finest quality of light for white tones and colour spectrum.

Its custom LED array and powerful on-board colour control allows bright and high-quality whites, up to 97 CRI, whilst keeping a consistent output and ensuring total control of the light. The wide feature set includes theatrical functions such as tungsten emulation on dimming, colour gels, virtual CTO and studio functions, such as +/- green correction on linear white CCT.

 

Light Source

  • Source: Luxeon-C; 96x3W 6 colour custom LEDs source (red, green, blue, royal blue, mint, pc amber)
  • CCT: @ full 5,000K
  • Luminous flux: (5°) 3,805 lm; (10°) 4,790 lm; (14°) 5,047 lm; (19°) 5,380 lm; (26°) 6,681 lm; (36°) 6,814 lm; (50°) 5,773 lm; (70°) 7,430 lm @ full
  • Luminous flux: (zoom 15°-30°) (min angle) 5,290 lm; (max angle) 6,664 lm – (zoom 25°-50°) (min angle) 7,042 lm; (max angle) 9,817 @ full
  • Lux: (5°) 14,638 lx; (10°) 8,663 lx; (14°) 3,812 lx; (19°) 2,530 lx; (26°) 1,759 lx; (36°) 810 lx; (50°) 474 lx; (70°) 306 lx @ 5m full
  • Lux: (zoom 15°-30°) (min angle) 3,502 lx; (max angle) 1,800 lx – (zoom 25°-50°) (min angle) 2,608 lx; (max angle) 974 lx @ 5m full
  • CRI: 93.7 @ 3,200K; 97.6 @ 5,600K
  • R9: 98.6 @ 3,200K; 98.2 @ 5,600K
  • TLCI: 95 @ 5,600K
  • TM30 Rf: 92 @ 5,600K
  • TM30 Rg: 100.1 @ 5,600K
  • Source life expectancy: > 50,000 hr

 

Optics

  • Lens type: high-quality glass lens optics
  • Additional optics: optional 5° / 10° / 14° / 19° / 26° / 36° / 50° / 70° / zoom 15°-30° / zoom 25°-50°
  • Focus: manual
  • Other: see available accessories

 

Colour System

  • Colour mixing: RGB, Royal Blue, Mint, PC Amber
  • CCT: CCT control, + / – green correction, tungsten emulation
  • White presets: 2,800K ~ 10,000K
  • Colour wheel:
    • colour gels matching and RGB / HSI / CMY selectable colour mode (IP20)
    • LEE filter emulation and RGB / HSI / CMY input mode selectable (IP65)

 

Dynamic Effects

  • Gobo size: B, outer: 86 mm – image: 64.5 mm – thickness: 1.1 mm
  • Special features: 4 fan modes available and output management and linear crossfade channel from any white to any colour; virtual CTO on colours
  • Rotating gobos: 1 rotating gobo controlled on DMX (IP65)

Body

  • Body: sturdy die-cast aluminium body
  • Body colour: RAL 9004

Control

  • Protocols: DMX512, RDM
  • Stand alone: selection of static colours, white presets, manual colours and built-in effects with adjustable speed
  • DMX channels: UNO / DUO / Basic / Standard / Extended / RAW Direct / RAW 16bit / XYchannel
  • RDM: RDM ready for remote monitoring and settings
  • Display: graphic user interface
  • Firmware upgrade: yes, via USB – DMX interface (UPBOX2) not included (through dedicated software)
  • Master/slave: for synchronised operation of more units linked in a chain

 

Electronics

  • Dimmer: linear 0 ~ 100% electronic dimmer
  • Dimmer curves: 4 selectable dimming modes available
  • Strobe / shutter: 1 – 25Hz, electronic
  • Operating temperature: -20° ~ +45°
  • LED control: flicker free operation
  • Selectable PWM: 600 ~ 25,000Hz

 

Electrical

  • Mains power supply: 100-240 V – 50/60Hz
  • Max power consumption:
    • 270W (IP20)
    • 264W (IP65)
  • Output (at 230V): 7 units on a single power line
  • Power factor: > 0.95

 

Physical

  • Cooling: low noise fan
  • Suspension and fixing: bracket for hanging and positioning
  • Signal connection: Amphenol XLR 5p IN/OUT connectors
  • Power connection:
    • Neutrik powerCON TRUE1 IN/OUT connectors (IP20)
    • Seetronic powerCON TRUE IP65 IN/OUT (IP65)
  • IP rating:
    • 20 (IP20)
    • 65 (IP65)
  • Dimensions (WxHxD):
    • 264x259x539 mm / 10.39”x10.2”x21.22” (IP20)
    • 324x540x660mm / 12.76”x21.26”x25.98” (IP65)
  • Weight:
    • 7.9 kg/ 17.42lbs (IP20)
    • 10kg / 22.05lbs (IP65)

Product Range - EclProfile CT+

Product Code Colour
EclProfile CT+

PROECLCTPLUSBK

- - RGB + Warm White Download spec
EclProfile CT+ IP

PROECLCTPLUSIP

- - RGB + Warm White Download spec