PROLIGHTS EclFresnel 2K Range

PROLIGHTS EclFresnel 2K Range

EclFresnel 2K is the LED replacement for a standard tungsten 2.000W Fresnel. Featuring the output characteristics of a traditional Fresnel but with beam control, functional barn doors and a power source that focuses on outstanding colour rendition. The EclFresnel 2K adds all the advantages of LED to the Fresnel.

Products in this range include: EclFresnel 2KTU | EclFresnel 2KDY | EclFresnel 2KTW | EclFresnel 2KPTU | EclFresnel 2KPDY | EclFresnel 2KPTW

Light Source

• Source: 500W high-power white LED (TU/DY)
• Source: 500W 6 colour LED (red, orange, green, royal blue, blue, lime) (TW)
• CCT: (TU) 3,200K; (DY) 5,600K
• CCT: (TW) 2,800K – 10.000K
• Luminous flux: (TU) (15°) 20,256 lm; (47°) 26,126 lm @ full
• Luminous flux: (DY) (15°) 26,255 lm; (45°) 32,428 lm @ full
• Luminous flux: (TW) (17°) 10,100 lm; (52°) 13,400 lm @ full
• Lux: (TU) (15°) 9,047 lx; (47°) 1,770lx @ 5m full
• Lux: (DY) (15°) 11,975 lx; (47°) 2,306lx @ 5m full
• Lux: (TW) (17°) 3,864 lx; (52°) 710lx @ 5m full
• CRI: (TU) >94; (DY) >91
• CRI: (TW) 89 @ 3,200K; 90.7 @ 5,600K
• R9: (TU) >73; (DY) >80
• R9: (TW) 80 @ 3,200K; 85.4 @ 5,600K
• TLCI: (TU) >93; (DY) >93; (TW) 87 @5,600K
• TM30 Rf: (TU) >92; (DY) >88
• TM30 Rf: (TW) 89.4 @ 3,200K; 86.2 @ 5,600K
• TM30 Rg: (TU) <103; (DY) <104
• TM30 Rg: (TW) 101.6 @ 3,200K; 102.1 @ 5,600K
• Source life expectancy: >50,000 hr

Optics

• Zoom: 15° – 47° half peak angle (TU & DY)
• Zoom: 17° – 52° half peak angle (TW)
• Lens diameter: 250mm
• Lens type: Fresnel zoom lens
• Other: spigot, barn door and gel frame included

Colour System (TU & DY)

• Colour mixing: warm white
• Macros: several pre-build macros with adjustable speed

Colour System

• Colour mixing: 6 colour custom LEDs source (red, orange, green, royal blue, blue, lime)
• CCT: CCT control, + / – green correction, tungsten emulation
• White presets: 2,800K – 10,000K
• Colour wheel: virtual colour wheel with macros
• Macros: several pre-built macros with adjustable speed

Dynamic Effects (TU & DY)

• Static colour mode: selection of static dimmer
• Manual colour mode: manual adjust of dimmer through menu and knob
• Auto mode: built-in programs with execution speed adjustment

Dynamic Effects (TW)

• Static mode: selection of static colour
• Manual mode: manual adjustment of intensity, CT, colour correction from knob
• Auto mode: built-in programs with execution speed adjustment
• Special features: linear crossfade channel from any white to any colour; virtual CTO on colours

Body

• Hardware on-board: filter frame, 8 doors barndoor, spigot
• Pan angle: (for pole operated version) 360° with manual regulation
• Tilt angle: (for pole operated version) 150° with manual regulation
• Body: sturdy die-cast aluminium body
• Body colour: black
• Other: spigot 28mm

Control

• Protocols: DMX512, RDM, rotary knob
• DMX channels: 1 / 2-1 / 2-2 / 3 / 5 channel (TU &DY)
• DMX channels: 1 / 2 / 5-1 / 5-2 / 7-1 / 7-2 / 8 / 9 / 12 / 13 / 16 / 19 / 21 channel (TW)
• RDM: RDM ready for fixture remote monitor and settings
• Display: graphic user interface
• Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included
• Master/slave: for synchronised operation of more units linked in a chain
• Other: 16bit control of dimmer

Electronics

• Dimmer: linear 0~100% electronic dimmer
• Dimmer curves: selectable dimming modes available (TU & DY)
• Dimmer curves: 4 selectable dimming modes available
• Strobe / shutter: 1 – 30Hz, electronic
• Operating temperature: -10° ~ +45°
• LED control: flicker free frequency with adjustable PWM
• Selectable PWM: 600~25kHz

Electrical

• Mains power supply: 100-240V – 50/60Hz
• Max power consumption: 500W (TU & DY)
• Max power consumption: 400W (TW)
• Power consumption (at 230V): 466W
• Power consumption (at 120V): 469W
• Output (at 230V): 4 units (TU & DY) / 5 units (TW) on a single power line
• Power factor: >0.96 (TU & DY)
• Power factor: >0.93 (TW)

Physical

• IP rating: 20
• Cooling: combination of heat pipe cooling system and low noise fan
• Suspension and fixing: bracket for hanging and positioning
• Signal connection: Amphenol XLR 5p in/out connectors
• Power connection: Neutrik powerCON TRUE1 in/out connectors
• Dimensions (WxHxD): 421x537x456mm
• Dimensions PO system (WxHxD): 401x691x456mm
• Weight: 17.2kg
• Weight PO system: 18kg

Arrange a Demo

If you’re interested in finding out more about any of our Static Lights, arrange a demo or email us

Additional Reading

Lighting News – Keep up to date with new Lighting products, interviews, press releases and much more!