PROLIGHTS EclFresnel 2K Range
The PROLIGHTS EclFresnel 2K range is an LED replacement for a standard 2K tungsten Fresnel. Featuring the output characteristics of a traditional Fresnel luminaire with zoom, functional barn doors and an LED engine that focuses on outstanding colour rendition.
Light Source
- Source: 507W high-power white LED (TU/DY)
- Source: 507W 6 color LED (red, orange, green, royal blue, blue, lime)
- CT: (TU) 3200 K – (DY) 5,600K
- CRI: (TU) 97 Ra – (DY) 95
- R9: >90
- Luminous flux: (TU) (50°) 25,338 lm (17°) 22,556lm @ Full
- Lux: (TU) – (17°) 28,400 lux – (50°) 6,150lux @ 3m full
- Lux: (TU) – (17°) 10,224 lux – (50°) 2,214lux @ 5m full
- Source life expectancy: >50,000 h
- Other: TM30-15RF: (TU – 16°) 94/103 – (TU – 52°) 93/104 – TLCI: (TU – 16°) 94.8 – (TU – 52°) 94.4
Optics
- Zoom: 15° – 45° manual
- Lens diameter: 250mm
- Lens type: Fresnel zoom lens
- Other: Spigot, barn door and gel frame included
Colour System
- Colour mixing: warm white
- Macros: several pre-build macros with adjustable speed
Dynamic Effects
- Static colour mode: selection of static dimmer
- Manual colour mode: manual adjust of dimmer throught menu and knob
- Auto mode: built-in programs with execution speed adjustment
Body
- Hardware on-board: filter frame, 8 doors barndoor, omega bracket spigot
- Body: sturdy die-cast aluminium body conceived for long-time durability
- Body colour: black
- Other: Pan/Tilt infinite for pole operated version
Control
- Protocols: DMX512, RDM, Local knob
- DMX channels: 1 / 2-1 / 2-2 / 3 / 5channel
- RDM: RDM ready for fixture remote monitor and settings
- Display: black OLED high resolution display
- Firmware upgrade: yes, via USB-DMX interface (UPBOX1) not included
- Master/Slave: for synchronised operation of more units linked in a chain
- Other: 16bit control of dimmer
Electronics
- Dimmer: linear 0~100% electronic dimmer
- Dimmer curves: different dimming curves available
- Strobe / shutter: 1 – 30Hz, electronic
- Operating temperature: -10° ~ +45°
- Flicker: flicker free frequency with adjustable PWM
- Selectable PWM: 600~25kHz
Electrical
- Power consumption: 550W
- Power supply: 100-240V – 50/60Hz
- Power consumption (at 230V): 466W
- Power consumption (at 120V): 469W
- Output (at 230V): 4 units on a single power line
- Output (at 120V): 2 units on a single power line
- Power factor: pF 0.96 @ 230V – pF 0.99 @ 120V
Physical
- Cooling: combination of heat pipe cooling system and low noise fan
- Suspension and fixing: hanging bracket suitable for safe hanging and positioning
- Signal connection: Amphenol XLR 5p IN/OUT connectors
- Power connection: Neutrik powerCON TRUE1 IN/OUT connectors
- IP rating: 20
- Dimensions (WxHxD): 421x537x455mm
- Weight: 17.2kg