PROLIGHTS ArcShine Range
The PROLIGHTS ArcShine range are a series of linear IP66 LED fixtures designed for interior and exterior applications, including flood lighting, wall washing and accent lighting.
PROLIGHTS Arcshine Range
There are two sizes available in the ArcShine range, an 18 LED 1m version and the other with 9 LEDs at 0.5m in length. The fixtures are either RGB + Warm White colour mixing or variable white. These are split again into two beam angle versions, the M range with 8 degrees and the S range with 15 degrees.
The ArcShine range has an on-board power supply and DMX/RDM control, with the 1m version controllable in two sections.
The aluminium body is die-cast and comes with tempered glass making them ideal for outdoor architectural use.
Products in the range include: ArcShine M9FC | ArcShine M9VW | ArcShine M18FC | ArcShine M18VW | ArcShine S9FC | ArcShine S9VW | ArcShine S18FC | ArcShine S18VW
Light Source
- See individual spec sheets below
Optics
- M range beam angle: 8°
- S range beam angle: 15°
- Optional holographic symmetric and elliptical filters: 20°; 40°; 60°; 10°x60°; 30°x60°
- Additional optics: see available accessories
Colour System – FC
- Colour mixing: RGB + Warm White
- CCT: CCT control through dedicated DMX channel
- Colour wheel: virtual colour wheel with macros
- Macros: built-in white presets
Colour System – VW
- Colour mixing: Variable White
- CCT: CCT control through dedicated DMX channel
- Macros: built-in white presets
Body
- Tilt angle: manual 180°
- Body: sturdy aluminum profile
- Body colour: RAL 7012
Control
- Protocols: DMX512, RDM
- Stand alone: available through DATAMASTER external coder (not included)
- DMX channels FC: 1 / 2 / 5 / 9 / 12 / 14 channel
- DMX channels VW: 1 / 2 / 5 / 9 channel
- RDM for remote monitoring and settings
- Display: user interface through DATAMASTER external coder (not included)
- Firmware upgrade: yes, via USB – DMX interface (UPBOX1) not included
- Master/Slave: for synchronised operation of more units linked in a chain
- Other: 16bit control of dimmer and colour
Electronics
- Dimmer: linear 0 ~ 100% electronic dimmer
- Dimmer curves: 4 selectable dimming modes available
- Strobe / shutter: 1-30Hz, electronic
- Operating temperature: -20° C / +45° C (-4° F / +113° F)
- Selectable PWM: 600 ~ 25,000Hz
Electrical
- Mains power supply: 100-240V – 50/60Hz
- Output (at 230V) M9/S9: 30 units on a single power line
- Output (at 230V) M18/S18: 15 units on a single power line
- Power factor: >0.94 (S9FC >0.95)
Physical
- IP rating: 66 for outdoor installations
- IK rating: 09
- Cooling: passive cooling and fan-free
- Suspension and fixing: double hanging bracket suitable for safe hanging and for floor positioning
- Adaptors: XLR and BARE END 16A adaptors included
- Signal connection: moulded IP signal IN/OUT connectors
- Power connection: moulded IP power IN/OUT connectors
- Dimesions / weight: see individual spec sheets below
Arrange a Demo
If you’re interested in finding out more about any of our architectural fixtures, arrange a demo or email us
Additional Reading
Lighting News – Keep up to date with new Lighting products, interviews, press releases and much more!