NovaStar MX30 LED Display Controller
The NovaStar MX30 is an all-in-one LED display controller. This controller integrates video processing and video control into one box and offers rich video input connectors (HDMI 2.0, HDMI 1.4, DP 1.1 and 3G-SDI), 10x Ethernet output ports and 2x 10G optical ports. It can also work with the brand-new software VMP (Vision Management Platform) to provide a better operation and control experience.
NovaStar MX30 LED Display Controller
Input & Output Features
- Multiple types of inputs
− 1x HDMI 2.0 (with loop through)
− 1x HDMI 1.4 (with loop through)
− 1x DP 1.1
− 2x 3G-SDI (with loop through) - 10-bit and 8-bit video inputs
- 3 types of outputs
− 10x Gigabit Ethernet ports, load capacity up to 6.5 million pixels
− 2x 10G optical ports
− 1x SPDIF digital audio port - 3 types of controls
− 1x Genlock signal input (with loop through)
− 2x Ethernet control ports
− 1x Auxiliary port
Advanced Features
- 3 independent layers
Support up to 3 layers and layer priority adjustment in Z order. - Image scaling
Support 4 image scaling modes: custom, pixel to pixel, snap to canvas and fill screen. - 14Ch Color Correction
Support precise adjustment to hue, saturation and brightness of black, white and the 12 derived standard colours of the red, green and blue primary colours. - Full Grayscale Calibration
Work with NovaStar’s high-precision calibration system and the C3200 scientific grade camera to generate unique calibration coefficients for each grayscale, ensuring uniformity of each grayscale and dramatically improving the image quality. - HDR
− Support HDR10 and comply with the SMPTE ST 2084 and SMPTE ST 2086 standards.
− Support HLG - Latency
− Support low latency and the controller load capacity is not reduced. The latency at the controller is 0 frame (less than 1 ms) in SendOnly Controller working mode and 1 frame in All-In-One Controller working mode.
− Support additional latency. Zero to two frames of latency can be added at the controller. - Frame Rate Adaptive
The controller can be adaptive to various video input frame rates, including decimal frame rates. Custom frame rates are also supported and the step size of fine tuning frame rate is as small as 0.01 Hz. - Two working modes
Support the All-In-One Controller and Send-Only Controller working modes.
− In the Send-Only Controller mode, the latency can be reduced by one frame.
− In the All-In-One Controller mode, the layer and scaling functions are available. - Display system monitoring
Support monitoring of the device status and screen status. Any fault and alarm information can be reported actively
