Spotlight Fresnel LED 200W Hyperion 6C
The Spotlight Fresnel LED 200W Hyperion 6C has been designed to satisfy professional users that don’t need the amount of light of a 300W but still like to have a high spec, compact, lightweight fixtures.
Light source
- 200W, 6 colours LED engine
- Very compact LED array for high definition projection
- High CRI from 94 up to 97
- Continuous light spectrum
Optics
- High definition sealed condenser optic (4 lens condenser)
- 200mm borosilicate lens
- Zoom: 13°-50°
Features
- Two local controls for direct adjustment of intensity and eight different white colour temperatures + 40 pre-selected colours + 10 slots for customised colour
- Colour booster to increase the light output of a single colour (+20%) when not all the channels are at full at the same time
- For the emulation of tungsten sources, there is an amber shift function
- Emulation of RGB and CMY function for easier selection of the colour when in use with different kinds of light source
- Hue and saturation with possible selection of colour temperature of the white saturation
- Calibration function to be used to “pre” balance the single colour according to the use with different brands or older fixtures
- Stand-alone function with memories and chasers, for use without desk
- Master & slave configuration for large installation set up
- 2700 – 8000K continuously variable CCT
Software
- Service channel for a direct control off all the software options from the desk, instead of from display
- 8 or 16 bit control for extra soft dimming and colour mixing, without changing colour temperature
- Adjustable delay in turning on and off for tungsten emulation
- powerCON TRUE1 connectors in/out for mains XLR 5 pins for DMX
- Electronic autoranging power supply: 100-240V, 50-60 Hz
- IP 20
- CE compliant
- Factory LED calibration
- Wireless ready (optional)
- No spill light towards audience
- Double slots for accessories
- DMX512-A / RDM remote control
Thermal Management
- Wide ventilation slots for better LED cooling with selectable fan speed in: “standard”, “silent” and “auto” or DMX regulated
- High efficiency heat pipe cooling system
- No heat load from LED engine towards electronic and vice versa avoiding the risk of failure due to overheating
Electrical
- Reversible graphic panel with selectable automatic switching off of the display
- Local control for easy adjustment of the intensity
- Flicker-free mode with adjustable PWM LED frequency for use with cameras
- Software update through XLR DMX connector
Optional Accessories
- 4 leaf barndoor
- Colour filter frame
- Pole operated version
