This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

Lightware Connector Sized DVI to Fibre Receiver (LC Connectors, HDCP Compliant, 10km Extension)

Manufacturer Lightware Visual Engineering

Request more information or contact us now for purchasing information.


DVI-HDCP-OPTS-TX90 and DVI-HDCP-OPTS-RX90 pair is a DVI fiber transmitter / receiver set for up to 10 km distance transmission. Using Single Fiber Technology the DVI signal with HDCP encryption is transmitted over only one single mode 9/125 fiber core. Sources and display devices are galvanically isolated against ground loops and hum effects, and no delay occurs in the signal, the video image is transported without any frame latency.

Powered from DVI source the DVI-HDCP-OPTS-TX90 transmitter does not need external power adaptor simplifying system installation. Support EDID pass-through for video source to read video display device's capability.

Recessed thumbscrews allow easy mounting directly to DVI receptacle by hand, or by using a flat-bladed screwdriver. This is most useful in space constraint applications, where the connectors are too close, and can be reached only from the rear side. Massive solid metal casing provides excellent cooling and maximum reliability.


  • Professional AV systems, conference rooms
  • Fixed installations, Rental and Staging
  • Digital signage
  • Long distance lossless DVI or HDMI signal transmission
  • Ground loop isolation

Key Features

Key Features

  • Extends DVI-D or HDMI signals with Single Fiber Technology
  • 1920 x 1200 or 2048 x 1080 maximal resolutions
  • Embedded audio
  • Supported:
  • uncompressed: PCM, Multichannel PCM
  • compressed: DTS, Dolby Digital
  • Not supported: Dolby true HD, DTS-HD, DTS-HD Master Audio
  • Plug & Play
  • Zero frame latency - no delay
  • No compression
  • EDID transparent
  • TX and RX both have Link status LED
  • Micro USB cable supplies power for receiver
  • Power supplied through DVI connector for transmitter
  • Max fiber cable length of 10.000m (using OS1 9/125 Singlemode fiber)
  • DVI connector sized form factor
  • Solid metal housing for professional use
  • Recessed (slotted) thumbscrews
  • Improved ESD protection
  • LC connectors



  • Data rate: 6.75 Gbps (2.25 Gbps per color)
  • Resolution: up to 1920 x 1200 or 2048 x 1080 pixels
  • Video Delay: 0 frames
  • HDCP pass through: Yes
  • EDID emulation: transparent EDID
  • LED indicators: Link status LEDs
  • RS-232 pass through: no
  • Fiber: 9/125 LC Singlemode
  • Laser wavelengths: 1490, 1550 and 1310 nm
  • Laser class specifications: Class 1M
  • Transmitter output OMA*: -8 dBm (worst case)
  • Receiver OMA* sensitivity: -17 dBm (worst case)
  • Optical loss budget: 10 dB (worst case)
  • Transmission distance
  • (using OS1 type fiber): 10 km
  • Power: from source or sink device through
  • micro USB cable
  • Power consumption (TX): 1.4 W
  • Power consumption (RX): 0.8 W
  • Enclosure: solid metal
  • Dimensions: 40 W x 74 D x 15 H mm
  • Weight: 80 g
  • Compliance: CE
  • Warranty: 3 years

OMA*: Optical Modulation Amplitude


  • TX input , RX output: 24 pole DVI-D plug
  • Fiber: LC simplex
  • DC Power: micro USB

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.


No downloads

No accessories