This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

Luminex GigaCore 16Xt With PoE Supply

Product Code LU0100048-POE
Manufacturer Luminex

Request more information or contact us now for purchasing information.


The GigaCore 16Xt is a Gigabit Ethernet switch designed to cope with the most demanding lighting and AV installations. Managed through an intuitive web interface, the unit can also be configured from the front end display*, making this switch an hassle-free solution for every day job.
Four SFP cages also offer users to create complex network topologies over fiber link, such as mesh or ring. Additional available options makes the GigaCore 16Xt one of the most secured system of the industry.


  • 12 x 10/100/1000Mbps Ethernet connections on Neutrik Ethercon connector
  • (10 on the front , 2 at the rear)
  • 4 x SFP cages (Accept 100/1000Mbps compliant mini GBIC transceiver)
  • 1 x IEC power inlet
  • 1 x Molex Micro-Fit 6 pin connector for redundant PSU
  • 1 x Molex Micro-Fit 6 pin connector for redundant PoE supply
  • 1 x RJ45 for serial console port
  • 1 x RJ45 for expansion port


  • Wire-speed Layer 2 Switching
  • Sound protocol compliant: Low jitter
  • Industry specific web interface
  • Front end display for basic configuration*
  • RLinkX: Activate redundancy on ports to create secured links
  • Group: Create group within your network for a better network isolation*
  • MultiLinkX: Group ports together to increase the available bandwidth between two GigaCore switches*
  • Port status
  • 3 LEDs per port: PoE, RLinkX*, Link/Speed
  • 4 status LEDs for the device: OK, PoE, RLinkX*, Power
  • Redundant fans
  • Universal power supply: 100-240VAC


  • PoE supply unit: Deliver up to 100W through the 10 front Ethercon connectors
  • Backup PSU
  • Backup PoE supply unit

*available in a future release



Network: 12 x 10/100/1000Mbps shielded
Neutrik Ethercon connectors 
10 on the front, 2 at the rear
4 x SFP cages, compliant
with 10/100/1000Mbps Mini GBIC transceiver
1 x serial RJ45 console port
1 x RJ45 expansion port
Power: 1 x IEC inlet with fuse holder
1 x redundant power input on
Molex Micro-Fit 6 pins connector
1 x redundant PoE input on
Molex Micro-Fit 6 pins connector

Switch Features

Ethernet Compliance: IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet
Supported Protocols: IEEE 802.1p CoS (Class of Service)
PoE (802.3af) through optional module
Ethernet Switch Type: Full non blocking wire-speed switching performance
Memory: 4Mb
MAC Address Table: 8192 Entries
Address Learning / Aging: Self learning, Auto aging
SwitchingThroughput: 28Gbps
IGMP support: Yes (V1/V2)
IGMP Snooping: Available in a future firmware update

Port Features

Port Speed: Copper: 10/100/1000T
Fiber: 100/1000BaseX
Port Sensing: Auto negotiation
Auto Crossover: MDI / MDIX (allow to use straight or cross wired cable)
Auto Sensing: Full or Half Duplex (Gigabit is Full Duplex)

Status Report

Ethernet Port Connection: PoE (optional), RlinkX (Redundancy)
Link / Speed
Ethernet Port Speed: 100/1000Mbps LED
Device: Status LED
Power: Status LED
PoE: Status LED
RLinkX (Redundancy): Status LED


Configuration: Through the built-in web server or with the front end display menu

Power Input

Power Input: 90-260VA
Backup Power Input: 15VDC / 2A on Molex Micro-Fit 6 pin connector
Backup PoE Input: 48VDC / 2.1A on Molex Micro-Fit 6 pin connector
Power Consumption: Maximum 30W
Maximum 130W with PoE Supply Unit
Fuse: 3.15A 250V Slow Blow
Power over Ethernet (PoE) support: Optional PoE Supply Unit


Operating Temperature: 0 to +60 °C
Storage Temperature: -10 to +70 °C
Humidity (non condensing): 5 to 95 % RH


Enclosure: Metal housing
Dimensions (W x D x H): 482 x 204,3 x 44 mm
19" x 8.04" x 1.73"
Packaging: 520 x 235 x 50 mm

Additional informations

Approvals: CE, EN 55103-1, EN 55103-2, EN 60950-1, RoHS Compliance
EN 60825-1 Safety of laser Products-Part 1
EN 60825-2 Safety of laser products-Part 2
Order Reference: GigaCore 16Xt: LU01 00048
GigaCore 16Xt with PoE output: LU01 00048-POE
Note: Luminex LCE operates a policy of continuous development.
Luminex LCE reserves the right to make changes and improvements
to any of the products described in this document above without prior notice.
Specifications are subject to change without notice.

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.