This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

LSC GenVI 12ch x 16A Dimmer & Relay Rack with RCBO & 2 x 19pin Socapex Outputs

The GenVI represents the sixth generation of dimmers designed by LSC over its 35 year history and is built on their extensive experience for today's complex lighting and power control.

Product Code LSGENVI/16X
Manufacturer LSC

Request more information or contact us now for purchasing information.

Product detail

In acknowledgement of the changing demands of the marketplace, LSC has introduced a new intelligent dimming and power distribution unit, the GenVI Advanced Dimming System. The GenVI represents the sixth generation of dimmers designed by LSC over its 35 year history and is built on their extensive experience for today's complex lighting and power control.

Equally at home in the lighting, sound and video markets, for portable or permanent installation, the new GenVI Advanced Dimming System allows you to configure any of its outputs in any combination, to be an 8 bit or 16 bit dimmer or a direct power relay channel using TruPower. This enables GenVI to dim traditional lamps or power moving lights, LED fixtures, video screens or audio power amplifiers—in fact anything where controlled power distribution is needed.

Key features

  • TruPower Dimmer & Power Distribution.
  • Combined MCB/RCD (RCBO) circuit breaker per channel.
  • Auto Power Mode - switches Relay channels On when DMX is applied and Off when DMX is no longer present.
  • Dimmer channels can be 8 bit or 16 bit.
  • RDM - Remote Device Management enabled.
  • Operates on Mains input voltages between 90V and 260V phase to neutral.
  • On-board Help Screens.
  • Visual Alarms for Phase fail, over temperature and loss of DMX. PTFD Dimming (Pulse Transformer Fired Dimming). Local Riggers Control.
  • Auto Fan Control (user defined).
  • Colour Touchscreen with simple and intuitive navigation.

Specifications

Channels

12

Max Load per channel

16 Amps

Thermo-Magnetic Breakers

Yes

RCD/GFI protection

Yes

RCD/GFI Current Trip

30mA/Channel

DMX-512A input with RDM functionality

Yes

Control surface

3.2" color LCD with touchscreen.

Pre-heat (min) and Top set (max) levels per channel

Yes

Remote monitoring and control via RDM

Yes

Auto Power Mode - switches Relay channels On when DMX is applied and Off when DMX is no longer present

Yes

Dimmer channels can be 8 bit or 16bit

Yes

Visual Alarms for Phase fail, over temperature and loss of DMX

Yes

PTFD Dimming (Pulse Transformer Fired Dimming)

Yes

Local Riggers Control

Yes

Fan Control

Auto or user programmable speed

Colour Touchscreen with simple and intuitive navigation

Yes

Dimming Curves

4

Operating Temperature Range

0-40° C

Output Connector Options

  • 12 x Schuko Connectors.
  • Hardwired (terminals).
  • 2 x Wieland (Harting) 16-pin multi-pole connectors

Power Supply

Nominal 100-240 Volts. 3-phase star with fully rated neutral. 50-60Hz. (Single phase operation possible - 63A max). Operating range typically 90-260V, 45-65Hz. Earthing System: TN-S.

Power Input Connection

Hard-wired models are provided with 5 screw terminals for input power - no cable. Australian and Export models are fitted with a three phase 1.2m H07 rubber 5 core x 10.0mm2 cable with bare ends.

Control Input

DMX512 (1990) or DMX512-A (E1-11) and RDM (E1-20) via Front panel mounted 5-pin AXR in and thru connectors.

Product Dimensions WxDxH

483 x 300 x 132 mm. 19.0 x 11.8 x 5.25 inches.

Product Weight (Packed)

21kg. 46.2lb.

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.

Downloads

No downloads

No related products

No accessories