This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

Luminex Ethernet-DinMX4 on Terminal Blocks

Product Code LU0100042-TB
Manufacturer Luminex

Request more information or contact us now for purchasing information.


The Ethernet-DinMX4 is an Ethernet node that serves four DMX512 outlets, conform to DMX512-A, that can be used as input or output. The Ethernet links on the top are 10/100BaseTX connections on standard RJ45 connectors. All configuration can be done over Ethernet through a build in Web site. This all comes in DIN rail enclosure, ideal for architectural installations, or where space requirement is a critical factor.


  • 2 x 10/100BaseTX Ethernet connections on standard RJ45 connector
  • 4 x Isolated DMX512-A in/outputs via three pole terminal blocks, with termination (DMX512-A)
  • 1 x power inlet on two poles terminal block. The unit can also be powered through PoE (802.3af)


  • DMX routing, universe setting
  • Input and output enable / disable
  • DMX output frame rate setting
  • Supported protocols: DMX, DMX512-A, RDM, Art-Net™, sACN
  • Protocol selection per port
  • IP settings
  • Unit ID and labeling
  • Ethernet activity indication on front panel
  • Bi-color LEDs on DMX ports (DMX and RDM)
  • Up to 40 programmable profiles and routings
  • Up to 10 predefined profiles (splitters, mergers...)
  • Multi language Web interface


  • Ethernet <-> DMX conversion
  • Ethernet and DMX Merger
  • Ethernet and DMX Backup
  • DMX splitter / booster
  • DMX trigger. Remote selection of the control source
  • Built-in DMX softpatch
  • Wysiwyg enabled. DMX inputs can be visualised in Wysiwyg
  • DMX snapshot. Capture 3 fixed lighting states per outlet
  • Modification of captured values from the Web interface
  • Auto-load capture on boot-up (ideal as backup)



DMX: 4 x three poles terminal block
Network: 2 x 10/100Mbps RJ45 connectors (on the top)
Power: 1 x two poles terminal block

DMX Features

Supported Protocols: DMX512 (1986 & 1990), DMX512-A, RDM ANSI E1.20
DMX Port Direction: Input or output (configurable)
DMX Port Isolation: Optic and galvanic isolation per port
DMX Port Termination/Biasing: Yes
DMX Timing: Framerate: 10-40fps / Break: 176-352µs

Ethernet Features

Supported Protocols: Art-Net™, sACN ANSI E1.31
Port Speed: 10/100BaseTx
Port Sensing: Auto-negociation, MDI/MDIX

Additional Features

Monitoring Software: LumiNet Monitor V2 at no cost
Wysiwyg Enabled: Yes (visualize inputs)

Status Report

DMX and RDM activity: Bi coulour LEDs on DMX ports
Ethernet Port Connection: Link and activity
Power: LED indication


Power Input: 12-24 VDC
Power Consumption: Maximum 10 W
Power over Ethernet (PoE) Support: Yes (802.3af compliant)


Operating Temperature: 0 to +60 °C
Storage Temperature: -10 to +70 °C
Humidity: 5-95% non-condensing


Enclosure: Standard DIN rail ABS enclosure
Dimension (W x D x H): 156.3 x 57.8 x 86 mm
6.15" x 2.28" x 3.39"
Weight: 0.27Kg
Packaging (W x D x H): 305 x 215 x 110 mm

Additional informations

Approvals: CE, RoHS Compliance
Order References: Ethernet-DinMX4 with Terminal blocks:
LU 01 00042-TB
Ethernet-DinMX4 with RJ45 DMX ports:
LU 01 00042-RJ45
Note: Luminex LCE operates a policy of continuous development.
Luminex LCE reserves the right to make changes and improvements
to any of the products described in this document above without prior notice.
Specifications are subject to change without notice.

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.


No downloads

No accessories