Shure P2R PSM200 Hybrid Bodypack Receiver
The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.
The P2R dual-function (Hybrid) receiver can operate as a wired, wireless bodypack (with optional P2T Transmixer) or both simultaneously. Features include 8 selectable frequencies per system, and up to 4 compatible systems can be used together without interference. It has a volume control with a built in headphone limiter and the high-impact plastic chassis makes it rugged and durable.
-Can operate as a wired or wireless bodypack, or both simulaneously
-Built-in headphone limiter
-Integrated cable management
-High-impact plastic chassis
-1/4" Line input jack with high/low gain switch
This is on channel 38. Range K9E.
Battery Life: Wired-6 Hours Wireless-4 Hours using 1 x 9v Battery
Dimensions: 122 mm x 73 mm x 32 mm
Weight: 100 g
Further Technical Specifications:
RF Sensitivity: 109 dBm typical
Squelch Threshold: 102 dBm typical
Antenna: Attached Whip
Audio Input Connector: Connector Type: 1/4-inch Mono
Impedance: 1 megohm
Maximum Input Level: LO = +0 dBu; HI = 10 dBu
Frequency Response: 30 Hz to 20 kHz (+/3 dB); earphone dependent
Power Requirements: 9 V alkaline battery, Duracell® type MN1604 recommended
Audio Output Connector: 1/8 inch (3.5 mm)
Minimum Load Impedance: 8 ohms
Net Weight: 100 g (3.52 oz.), less battery
Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.