This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

Audio-Technica AT2022 Stereo X/Y Condenser Microphone

Product Code AUAT2022
Manufacturer Audio-Technica

Buy this from the A.C. Audio Online Store. Request more information or contact us now for purchasing information.


The AT2022 is a condenser microphone designed for stereo recording. Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90°) or wide (120°) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of a live sound field. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug.


X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility

Provides the spatial impact and realism of a live sound field

Battery operation allows use with most recording devices

Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise

User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns

Ideal for general stereo recording and field sound capture

Excellent channel separation

Included fuzzy windscreen offers excellent wind protection


Elements: Fixed-charge back plate, permanently polarized condenser

Polar Pattern: X/Y Stereo

Frequency Response: 20–20,000 Hz

Low Frequency Roll-Off: 150 Hz, 6 dB/octave

Open Circuit Sensitivity: -41 dB (8.9 mV) re 1V at 1 Pa

Channel Balance: <2.5 dB

Impedance: 200 ohms

Maximum Input Sound Level: 122 dB SPL, 1 kHz at 1% T.H.D.

Dynamic Range (Typical): 103 dB, 1 kHz at Max SPL

Signal-To-Noise Ratio: 75 dB, 1 kHz at 1 Pa

Battery Type: 1.5V AA/UM3 

WARNING: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.

Battery Current / Life: 1.2 mA / 500 hours typical (alkaline)

Switch: Off, on/flat, on/roll-off

Weight: 270 g (9.5 oz)

Dimensions: 192.0 mm (7.56") long, 

65.0 mm (2.56") maximum head diameter, 

21.0 mm (0.83") body diameter

Output Connector: Integral 3-pin XLRM-type

Cable: 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end

Accessories Furnished: AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.


No downloads

No related products

No accessories

A.C. Audio Online Shop