0 items in your cart
This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

DPA 4066F d:fine Omnidirectional Headset Microphone to Microdot in Beige

Product Code DP4066F
Manufacturer DPA

Buy this from the A.C. Audio Online Store. Request more information or contact us now for purchasing information.

Description

The 4066 is a flexible miniature microphone solution that features very easy and fast adjustment. The headset construction is unique in design, offering both left and right mounting and color change. It is also possible to use the MMB4066 Miniature Microphone Boom, Omnidirectional, separately, in applications where the headset is not needed.

The 4066 offers a clean and transparent sound quality with lots of headroom.

Attention has been paid to the humidity problems that often occur in theatrical applications. A double vent protection system, a drop stopper on the microphone boom, together with water resistant materials inside the microphone, makes it more than difficult for the humidity to cause the microphone to fail. The headset surface is matte gold plated and the earhooks are covered with a silicone hose.

The sensitivity is 6 mV/Pa to match the level of the human voice to the general input sensitivity of most wireless transmitters. If powered correctly the microphone will be able to handle sound pressure levels up to 144 dB SPL before clipping occurs.

A wide range of connection adapters makes it possible to use the 4066 with most of the professional wireless systems available plus 48 V phantom XLR connection.

*Image is for the black version but this code is for the beige version. 

What is in the box

  • Microphone (boom, headband, cable)
  • A high-boost grid
  • A soft-boost grid
  • Five foam windscreens
Features
  • Directional pattern Omnidirectional
  • Principle of operation Pressure
  • Cartridge type Pre-polarized condenser
  • Frequency range 20 Hz - 20 kHz
  • Frequency range, ±2 dBSoft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz. High boost grid: 20 Hz - 20 kHz, 10 dB boost at 12 kHz
  • Sensitivity, nominal, ±3 dB at 1 kHz6 mV/Pa; -44 dB re. 1 V/Pa
  • Equivalent noise level, A-weightedTyp. 26 dB(A) re. 20 µPa (max. 28 dB(A))
  • Equivalent noise level, ITU-R BS.468-4Typ. 38 dB (max. 40 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)Typ. 68 dB(A)
  • Total harmonic distortion (THD)< 1% THD up to 123 dB SPL peak, < 1% THD up to 120 dB SPL RMS sine
  • Max. SPL, peak before clipping144 dB
  • Output impedance30 - 40 Ω
  • Cable drive capabilityUp to 300 m (984 ft)
  • Power supply (for full performance)For wireless systems: Min. 5 V - max. 50 V through DPA adapter. With DAD6001-BC/DAD6024/DAD4099: 48 V phantom power ±4 V for full performance
  • Connector: MicroDot
  • Color: beige 
  • Weight14 g (0.5 oz) incl. Cable and MicroDot connector
  • Microphone diameter5.4 mm (0.21 in)
  • Cable length1.2 m (3.9 ft)
  • Cable diameter1.6 mm (0.06 in)
  • PolarityPositively increasing sound pressure produces positive going voltage on MicroDot pin
  • Temperature range-40°C to 45°C (-40°F to 113°F)
  • Relative humidity (RH)Up to 90%

 

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.

Downloads

No downloads

No related products

No accessories

A.C. Audio Online Shop