This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

AKG GN30 30cm Gooseneck With 3 Pin XLR For Permanent Installation

Product Code AKGN30
Manufacturer AKG

Buy this from the A.C. Audio Online Store. Request more information or contact us now for purchasing information.


  • Rugged construction
  • Highly reliable contacts for capsule modules
  • Integrated LED ring status indicator
  • Integrated switchable bass rolloff
  • Mini XLR connector or unterminated cable ends

For permanent screw-on installation, AKG offers goosenecks in various lengths: GN 15: approx. 15 cm (6 in.); GN 30: approx. 30 cm (12 in.); GN 50: approx. 50 cm (20 in.). Except for the GN 30 OC with unterminated cable ends, all come with a DPA in-line XLR phantom power adapter with integrated 200 Hz bass rolloff and LED ON/OFF jumper. The DPA connects to any standard mixer input with 9 to 52 V power supply. The mini XLR connector will thread through any hole from 11 mm (0.44 in.) in diameter. This eliminates the need for large holes or awkward unsoldering and resoldering of the much larger phantom power adapter during installation.
See product images for mounting examples.

Standard accessory: Phantom power adapter

The external phantom power adapter of the GN series makes setting up the goosenecks much easier, since a small hole will suffice for threading through a mini XLR connector. Having disconnected the cable, the integrated bass cut can be set quite easily inside the phantom power adapter. The phantom power adapter will operate off any available phantom power supply from 9 to 52 V, powering both the condenser capsule and the LED ring.


  • Bass filter: 250 Hz, -10 dB at 50 Hz
  • Impedance: <=600 ohms
  • Recommended load impedance: >=2,000 ohms
  • Supply voltage: 9 to 52 V phantom power to DIN/IEC
  • Powering: <3 mA
  • Connector: 3-pin male XLR; GN 30 oc: stripped and tinned leads
  • Cable: 1.5 m (5 ft.)
  • Finish: matte dark grey
  • Net weight GN 30: 110 g (3.9 oz.)
  • Shipping weight GN 30: 522 g (18.4 oz.)

The installation module shall be a 160/305/500 mm (6.3/12/20 in.) gooseneck with a rugged connecting thread and self-cleaning, large gold plated contacts for connection to all D.A.M. Capsule Modules. The installation module shall incorporate an LED ring that may be phantom powered or externally powered. The installation module shall be finished with several layers of nonreflective, dark gray enamel. The installation module shall be provided with a 3/8" internal thread for permanent installation. The installation module shall be supplied with an in-line XLR phantom power adapter (DPA) with a 1.5 m cable terminated in a mini XLR connector. The DPA shall incorporate a jumper selectable highpass filter and LED ring. Also supplied with the installation module shall be a set of installation screws. The net/shipping weight of the installation module shall be: GN 15: 72/400 g (2.5/14.1 oz.); GN 30: 110/522 g (3.9/ 18.4 oz.); GN 50: 120/495 g (4.2/17.5 oz.).

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.


No related products

No accessories

A.C. Audio Online Shop