This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

ART Cleanbox Two - Hum Eliminator

Manufacturer ART Applied Research and Technology

Request more information or contact us now for purchasing information.


"Hum" in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called "ground loops". The safest way to eliminate unwanted noise is with the CleanBOX II. Some examples of Ground Loops:

The power ground of a synthesizer, connected to the signal ground of the synth, into a mixer's ground, then into a mixer's power ground.
The signal ground of a send effect (reverb, delay) into a mixer, and the connecting power grounds of the mixer and the unit.
The power ground of a guitar amplifier, connected to a signal processor which has a second guitar amplifier on the other channel, and then the second guitar amp's power ground.
The CleanBOX II easily removes ground loops without any signal degradation.


A.C. Audio Online YouTube Channel Banner


Frequency Response: 10Hz - 50kHz, +/- .5dB
@ +4dBu
THD: .01% Typical @ 1kHz, +18dBu,
<.05% @ 100Hz, +24 dBu
Insertion Loss: .4dB @ 100kOhm Load, 5.5dB
@ 600Ohm Load
Connections: 1/4" TRS balanced/unbalanced
Power: Passive
Dimensions: 4.5 x 2.875 x 1.5 inches
(114mm x 73mm x 38mm)
Weight: .9 lbs (.4kg)

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.


No downloads

No related products

No accessories

A.C. Audio Online Shop