EMO CR6 Remote Panel Unit
A unit for the switching of audio or other systems that require to be powered up and down in a particular sequence, the up (on) sequence is the mirror image of the down (off) sequence. Instructions to initiate the sequence are input by a four digit code on a keypad either on the master unit, or on a separate keypad in a remote location (1U rackmount and 2-gang electrical versions available). The code ensures that only authorised personnel can operate the system. A fully equipped system can have ten sequentially delayed outputs. The master unit houses within a 2U rack mounting case all the control electronics for a fully equipped system, the keypad inputs, slave unit control outputs and power switched outputs 1 and 2. Output 2 in the master unit and all slave outputs are rated at 32 amps.
Applications include: theatre sound, touring systems, recording studios, audio visual, broadcasting systems, discotheques, night clubs and computer systems.
Upon entry of the correct combination (code), the code accept LED (marked 'ON') will illuminate, after approx 10 secs output 1 and output 1LED will turn on. This sequence will continue until all connected outputs have latched on. During the turn-on sequence no 'OFF' code will be accepted. Once the 'ON' cycle has been completed, entry of the correct combination (code) will start the turn-off sequence i.e. turn-on in reverse. As with the 'ON' sequence, the 'OFF' sequence will not accept an 'ON' code until the system has completed its cycle. On mains power-up or after loss of power the system will reset to 'OFF'.
Includes a "fire alarm" interface as standard that is activated by opening contacts which trigger the controlled turn-off sequence.
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.