0 items in your cart
This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

Audio-Technica ATND8677 Dante-Enabled Mic Desk Stand For Use With Any Gooseneck Microphone With XLR

Product Code AUATND8677
Manufacturer Audio-Technica

Buy this from the A.C. Audio Online Store. Request more information or contact us now for purchasing information.



The ATND8677 is a Dante-enabled microphone desk stand for use with any gooseneck microphone with a three-pin XLRM-type output connector. The desk stand is designed for surface-mount applications such as high-quality sound reinforcement, conferencing, distance learning and other demanding sound pickup applications.

The desk stand features a touch-sensitive capacitive-type user switch with integral red/green LED status indicator. In Local mode the user switch mutes and unmutes the microphone. It can be set to toggle between live and muted audio (toggle on/off), to permit live audio only while the switch is pressed (press to talk), or to mute the audio while the switch is pressed (press to mute). In Remote mode the user switch can be used to trigger functions on compatible Dante-enabled devices, such as a video camera's pan/tilt or a room's lighting preset. While in Remote mode the desk stand's audio output is controlled remotely. An integral 80 Hz low-cut UniSteep® filter provides easy switching from a flat frequency response to a low-end roll-off. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrations. A three-position input gain level selector permits trim adjustment to accommodate louder and softer voices. The desk stand provides 12V DC phantom power by default, which can be switched off and on.

The gain, low-cut UniSteep® filter, red/green LED status indicator and phantom power can all be controlled locally or remotely via third-party software.* Recessed buttons on the bottom of the desk stand allow user to configure the desk stand settings locally. Audio, low-cut, gain and phantom power settings can be locked in Local mode by pressing and holding the lock button. This lock will prevent end users from adjusting the settings. Default settings for the stand are as follows: audio toggle on/off (with audio muted at power up), low-cut filter off, +30 dB input gain, phantom power on.


  • Connects directly to network via Ethernet cable—no soldering or additional cable required
  • Integrated user switch controls talk/mute in Local mode and triggers Dante-enabled devices in Remote mode
  • Local or remote control of gain, low-cut UniSteep® filter, red/green LED status indicator and phantom power
  • Powered by network PoE
  • Scalable across Dante’s 512 bidirectional audio channels
  • Touch-sensitive capacitive-type user switch
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • 3-pin XLRF-type input for quick mounting of any gooseneck microphone with an XLRM-type output
  • Heavy die-cast case and non-slip silicone foam bottom padsminimize coupling of surface vibration to the microphone




Frequency response: 20-20,000 Hz
Low frequency roll-off: 80 Hz, 18 dB/octave
Input impedance: 1.4 kO
Maximum input levels: -10 dBu @ +30 dB gain / -20 dBu @ +40 dB gain / -30 dBu @ +50 dB gain
Signal-to-noise ratio1: 68 dB, 1 kHz at 1 Pa
Power requirements: PoE IEEE802.3af standard
Power consumption: 1.5W
Microphone phantom power: 12V DC
Switches: Local Mode: Touch-sensitive capacitivetype user switch function: toggle (mute on power up), toggle (talk on power up), momentary on, momentary off; Low-cut filter: flat, roll-off; Gain: +30 dB, +40 dB, +50 dB; Phantom power: 12V DC, off Remote Mode: Low-cut and Gain via third-party software*
Weight: 770 g (27.2 oz)
Dimensions: 133.0 mm (5.24") maximum length, 93.8 mm (3.69") maximum width, 46.2 mm (1.82") maximum height
Input connector: 3-pin XLRF-type
Output connector: Physical level: standard Ethernet
Dante network:Connector: single RJ45 | Cable quality: Shielded CAT5 or CAT6 recommended | Transmission speed: 100 Mbps

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.


No downloads

No related products

No accessories

A.C. Audio Online Shop