Audio-Technica AT8681 UniMix 2 To 1 Microphone Combiner With Balance Control
The AT8681 combines the output from two microphones into one channel. The balance control attenuates each microphone by 6 dB (typical) at midpoint.
Professional XLR-type input/output connectors
Can be installed anywhere in-line, either at the mixer input or near the microphone
24-48V DC phantom power and balanced cables required for operation
Permits phantom voltage to pass on to the microphone
Rugged steel housing
Input/Output Connectors XLRF/XLRM-type
Phantom Power 24-48V DC, 2-4 mA typical
Frequency Response 20-20,000 Hz
Gain Unity (0 dB), +0/-1.5 dB
Noise (A-Weighted) -115 dBV typical
Weight 8.8 oz (250 g) typical
Dimensions 5.12" (130.0 mm) W x
2.36" (60.0 mm) D x
1.73" (44.0 mm) H typical
Input Impedance 10,000 ohms
Output Impedance 250 ohms
Maximum Input Level +15 dBV (1% T.H.D. at 1 kHz)
Maximum Attenuation 33 dB at 1 kHz
Notes UniMix specifications measured at 48V phantom power, 150 ohms input load and 100,000 ohms output load.
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.