LynxTechnik yellobrik Fibre To Ethernet Transceiver - Multimode (Fibre LC Connectors)
The OET 1510 is a compact 3 port Ethernet switch, designed to extend the reach of electrical Ethernet signals over long distances using a constant (fixed) high speed 1Gbit optical transceiver speed.
When paired with another OET 1510 at the receiving end (using two fibre links) you have a cost effective Ethernet extender system for distances up to 10km providing a stable, high speed 1Gbit error free optical connection between locations.
The OET 1510 has two standard RJ45 electrical Ethernet ports plus fibre I/O and functions as a 3 port Ethernet switch. For legacy system use; each electrical Ethernet port can be set for automatic speed detection (10/100/1000) or forced to 10Mbit, and each port can use auto crossover detection or be forced manually if needed. These functions are available using the dip switch.
- Supports standard Ethernet inputs up to 1Gbit
- 3 port Ethernet switch (1 fibre, 2 electrical)
- Auto (10/100/1000) electrical port speed selection
- Manually Force 10Mbit electrical speed (if needed)
- Fibre transceiver speed always 1Gbit
- Auto or manual electrical crossover selection
- Distances up to 10km (6.2 miles) over fibre
- TX 1310nm -3dBm
- RX Sensitivity -3dBm to -21dBm
- LC - PC optical connections
- Supports hot swapping and hot plugging
- 2 x Ethernet ports, RJ 45 Connectors.
- 10 BaseTUTP category 3,4 or 5 cable up to 328ft/100m (2 pairs)
- 100 BaseTXUTP category 5 cable up to 328ft/100m (2 pairs)
- 1000 BaseTXUTP category 5 cable up to 328ft/100m (4 pairs)
- Auto detect bit rate (10/100/1000), or force to 10Mbit for each port (selectable)
- Automatic crossover detection or force manually for each port (selectable)
- Port speed / activity LED indication (next to Ethernet port)
- 1 x fibre optic input (TX)
- 1 x fibre optic output (RX)Duplex (single mode) using LC/PC Connections
- IEEE 802.3z (1000BASE-X Gbit/s Ethernet over Fibre at 1Gbit/s (125 MB/s)
- Transmitter: 1310nm (-3dBm)
- Receiver: 1260nm to 1620nm (-3dBm to -21dBm)
- Fibre TX active and RX active LEDs on side of module
- Max. distance 10km (6.2 miles - Singlemode)
- +12VDC power supply (included)
- (Supports external power input from 9 - 14 VDC )
- Power LED on side of module
- 105mm x 40mm x 22mm (4.13" x 1.57" x 0.86")
- OET 1510
- 12V DC power supply
- Wall mounting brackets
- (Fibre optic cable not included)
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.