0 items in your cart
This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

Lightware TX95 DVI & TPS extender for single CATx cable (Transmitter)

Product Code LIDVI-HDCP-TPS-TX95
Manufacturer Lightware Visual Engineering

Request more information or contact us now for purchasing information.


Lightware DVI-HDCP-TPS-TX95 and DVI-HDCP-TPS-RX95 twisted pair HDBaseTTM extenders provide extension of uncompressed Full-HD video for long distances over a single CATx cable. The unit offers bi-directional RS-232, IR, and Ethernet pass-through all on the same CATx cable that carries the video signal. The TPS extenders support full HDCP and EDID compliance and works at all standard AV resolutions up to 4096x2130@30Hz and 48-bit colour depth handling all standard audio formats as well as 120 Hz 3D signals. Remote powering is available through the single CATx cable, but a local power supply can also be used. All devices can be mounted on a rack shelf or used standalone formats.

The Auto operation mode allows the device to detect the far end extender's mode and adopt it. If the far end device is in Auto mode or it is a third party HDBaseT device the link will be set to HDBT mode. If the far device is in forced Long reach mode then the Auto operation will set the Link to Long reach mode.


  • Post production studios
  • Control room
  • Digital Signage
  • Multiroom video
  • Conference rooms, collaborative telepresence

Key Features

Key Features

  • Single-Link DVI and HDMI extension over a single CAT7 cable
  • Two available firmware versions to maximize potential cable length
  • Operation mode switch (Auto or forced Long reach mode)
  • Low power mode in Auto operation mode
  • 10/100 Ethernet extension
  • Bi-directional RS-232 pass-through
  • Bi-directional IR pass-through
  • Supports all DVI resolutions up to 1080p or 1920x1200
  • Supports all HDMI 1.4 resolutions
  • Remote powered through CATx cable
  • HDCP compliant, CEC, EDID transparent
  • Compatible with 120 Hz 3D video signals
  • Uncompressed video/audio up to 10,2 Gbps
  • Live, Link detection, Video and HDCP detection LEDs
  • Rack mounting options
  • Locking DC connector



  • Data rate: 3.4 Gbps per colour
  • Resolution: All HDMI 1.4a resolutions supported
  • Equalization: adaptive, automatic
  • EDID support: transparent
  • HDCP pass-through: yes
  • Ethernet pass-through: yes
  • RS-232 pass-through: yes
  • IR pass-through: yes
  • Overall signal delay: 10µs (including 100m CATx cable)
  • Power: universal power adaptor, DC 12 V 2.5 A
  • Power consumption (-TX): 3.6 W (typ) 4.2 W (max)
  • Power consumption (-RX): 5.3 W (typ) 6.1 W (max)
  • Enclosure: 1 mm metal
  • Dimensions: 100.4 W x 100.4 D x 26 H mm
  • Net weight: 330 g / product
  • Compliance: CE
  • Warranty: 3 years


  • TX input, RX output: DVI connector
  • TX output, RX input: RJ45 (TPS interface)
  • Ethernet: RJ45
  • IR in, out: 3.5 mm TRS connector (1/8'' mini-jack)
  • Serial port: 9-pole D-sub
  • Power: locking DC connector (2.1 / 5.5 mm)

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.