0 items in your cart
This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

Lightware Dual Link DVI Over Fibre Receiver

Product Code LIDVIDL-OPT-RX100
Manufacturer Lightware Visual Engineering

Request more information or contact us now for purchasing information.


Designed for rental and professional use, the Lightware DVIDL-OPT-TX200 and DVIDL-OPT-RX100 extender pair can transmit Dual-Link DVI signals over two multimode fiber cables for up to 2500 meters distance. Neutrik OpticalCON DUO connectors ensure reliable operation which are also compatible with industry standard LC Duplex
fiber cables.

Dual-Link signal transmission supports '120 Hz' 3D signals.In this application the 3D picture is transmitted
through a Dual-Link DVI interface.

DVI Single-Link transmission is available as well with only one optical fibre. In Single-Link operation the transmitter and the receiver are fully compatible with Single-Link Lightware optical products.

Galvanic isolation between source and display helps to avoid ground loops and hum effects. No delay occurs in the signal during optical conversion, the video image is transported without any frame latency. This feature is crucial in 3D applications and systems where audio is processed separately.

Cross compatibility between Lightware optical products is ensured thanks to our attentive design. IThe DVIDL-OPT-TX200 and DVIDL-OPT-RX100 can work together easily in a standalone application, however with our hybrid modular matrix concept, it is possible to connect these extender boxes directly to the matrix router using an MX-DVIDL-OPT series input or output board.

Advanced EDID Management with USB control: using this unique feature there is no need to negotiate EDID information between the source and remote display. The DVIDL-OPT-TX200 transmitter stores up to 99 different EDID versions in it's non volatile memory and keeps the selected one continuously fixed on it's Dual-Link input available for the source computer. According to the user's setting any special pixel resolution can be created and emulated via Lightware's Advanced EDID Creatorsoftware.


  • Rental and staging
  • Military and GIS
  • Medical
  • Scientific visualizations
  • Virtual Reality Training
  • Simulation
  • Conference rooms, collaborative telepresence
  • Custom resolution and refresh rate EDID emulation
  • '120 Hz' active 3D visualizations

Key Features

Key Features

  • Extends Dual-Link DVI-D signals over two fibers
  • 4096 x 2400 maximal resolution
  • Single-Link operation mode with one fiber
  • Zero frame latency - No delay
  • No compression
  • Neutrik OpticalCON fiber connectors
  • Advanced EDID Management in transmitter
  • USB port for control and firmware upgrade
  • Status LEDs: source, signal, monitor and laser loss detection
  • Local monitor buffered loop Output at transmitter
  • TMDS Reclocking in receiver
  • Improved ESD protection



  • Data rate: 1.65 Gbps per color
  • Max Resolution: 4096x1200 or 2048x1080 Stereo
  • Video delay: 0 frames
  • HDCP pass through: no
  • EDID emulation: yes, Advanced EDID Management
  • EDID memory: 60 factory preset, 39 user programmable EDID in transmitter
  • EDID support: 256 byte Extended EDID v1.3
  • Front panel control: EDID management in transmitter
  • LED indicators (-TX200): power, source connected, signal present, hotplug, laser active
  • LED indicators (-RX100): power, laser detect, signal present, monitor connected
  • RS-232 pass through: no
  • Fiber: 50/125 LC Multimode
  • Laser wavelengths: 4 ch. CWDM: 778; 800; 825; 850 nm (high speed)
  • Laser class specification: Class 3B
  • Transmitter output OMA*: -6.25 dBm (worst case)
  • Receiver OMA* sensitivity: -14.25 dBm (worst case)
  • Optical loss budget: 8 dBm (worst case)
  • Transmission distance: >2500 m (using OM3e type fiber)
  • Power supply: External power adaptor (100 to 240 V AC, 50/60 Hz), (5 V DC, 2.5 A)
  • Power consumption (-TX200): 3.5 W
  • Power consumption (-RX100): 4 W
  • Enclosure: 1U quarter rack, 1mm metal
  • Dimensions: 110 W x 181 D x 42.2 H mm
  • Net weight (-TX200): 726 gramms
  • Net weight (-RX100): 701 gramms
  • Compliance: CE
  • Warranty: 3 years


  • Power: locking DC connector (2.5/5.5 mm)
  • DVI: 29 pole DVI-I connectors (only digital pins are connected)
  • Fiber: Neutrik NO2-4FDW type LC duplex
  • Control: mini USB (B type)

Maximum Extension Distances

OM1 (62.5/125) OM2 (50/125) OM3 (50/125) OM4 (50/125)
1080p@60Hz 24 bpp Not Supported 600 m 1200 m 2500 m

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.