HDanywhere mHub 2K (4x4) HDMI Over Cat5/6 Matrix
mHub 2K (4x4) supports Full HD 1080p resolutions up to 50m / 164 ft, over a single Cat 6 cable from four source devices to four displays with two-way IR and ARC (on RX). Four additional HDMI outputs can be used for integrating AVRs or mirrored displays. Control is delivered through TCP/IP, RS232 or direct IR with a range of third party control drivers available to download free of charge. mHub 2K (4x4) supports all stereo and multichannel audio formats up to and including Dolby-Atmos and DTS:X.
Setup is quick and simple with mHub 2K (4x4) . Every box includes one matrix with 12V PSU and rack mounting ears, four receivers with 5V power adaptors, IR kit, a small matrix remote and four USB to 5V power leads.
Since being released in the summer of 2014, mHub 2K (4x4) has been praised for its speed of switching. Stephen Withers, Assistant Editor of AVForums, found that "the switching was seamless and there was no degradation of signal, with the system performing exactly as advertised."
Control is delivered through TCP/IP, RS232 or direct IR, meaning mHub can be easily integrated with third party control systems. The EDID management tools enable the highest resolution audio to be passed to an AVR via the mirrored HDMI outputs, whilst video is sent to the display location. mHub 2K (4x4) has discretely routed IR passback, discrete matrix control via IR and forwards IR routed to displays. For a list of all supported video and audio formats, see the table in the specs section.
All mHub 2K (4x4) matrixes are sold as complete install packages. In the box, dealers get access to everything they need for an 4x4 install: a 1U rackmountable central hub with rack ears and 12V PSU, four display receivers with 5V PSUs, IR kit, a small matrix remote, and four USB to 5V power leads.
- Uses single CAT-5e/6 cable to send uncompressed video and audio over long distances from upto four source devices to up to four Displays
- Supports the following resolutions:
All 3D formats including 3D at 1080p60
Up to 48-Bit Deep Colour
- Supports stereo or multichannel audio formats including:
Dolby True HD
DTS-HD Master audio
- 4x mirrored HDMI outputs for AVR integration or additional displays
- Two-way IR supported
- IR passback allows you to select and control what you watch from every room
- Control is delivered via two-way RS232, TCP/IP, IR and front panel buttons.
|Maximum Video Inputs||4|
|Maximum Video Outputs||4|
|Mirrored Video Outputs||4|
|Supported Video Resolutions||
|Supported Audio Formats||
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.