Martin FibreSource QFX150
The FiberSource QFX150 is an automated 150 W colour-changing luminaire for illuminating fiber optic cables in permanent installations. It features a colour wheel with 9 interchangeable colours and smooth, full-range mechanical dimming.
Other features include a shutter and variable strobe on the dimmer wheel. Furthermore a twinkle wheel creates sparkling effects for star ceiling and star curtain installations.
The FiberSource QFX150 has an extended control in stand alone mode. Via the dip-switches, virtually any combination of colours, colour speed and twinkle speed is programmable. No external controller is required.
- 150 W metal halide lamp
- Colour wheel with up to 9 interchangeable colours (4 are included)
- 0-100% intensity control
- Up to 800 fibre cables (1 mm)
- Blackout and strobe functionality
- Twinkle wheel for sparkling effects
- DMX or stand alone control
Length: 330 mm (13.0 in.)
Width: 213 mm (8.4 in.)
Height: 199 mm (7.8 in.)
Weight: 10.4 kg (22.9 lbs.)
Type: 150 W metal halide
Approved lamps: Osram HQI-R 150
Socket: Separate connector for integral lamp wires
Control: Remote on/off
Colour wheel: 9 positions + open, continuous rotation
Twinkle effect: Removable section, continuous variable-speed rotation
Dimmer: 0 - 100%
Control and Programming
Control options: DMX, stand-alone, synchronised (master/slave)
DMX channels: 5
DMX address setting: DIP switch
Stand-alone and master/slave programming: DIP switch
Protocol: USITT DMX512/1990
Housing: Steel and aluminium
Finish: Electrostatic powder-coated
Colour: Black (RAL 9005)
Protection rating: IP20
Minimum distance to combustible materials: 0.1 m (0.3 ft.)
Minimum clearance around fan and air vents: 0.1 m (0.3 ft.)
Power connection: 3-pin IEC male socket
Data connection: 3-pin locking XLR
AC power: 100/120/210/230/250 V, 50/60 Hz
Main fuse: 5 AT (slow blow)
Typical Power and Current
120 V, 60 Hz: 205 W, 1.9 A
230 V, 50 Hz: 195 W, 1.0 A
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Maximum ambient temperature (Ta max.): 40° C (104° F)
Maximum surface temperature, steady state, Ta=40° C: 58° C (136° F)
Cooling: Forced air cooling system
Total heat dissipation (calculated, +/- 10%): 700 BTU/hr.
US safety: UL 153
EU safety: EN 60598-2-17 + Corr. A2
EU EMC: EN 55 015, EN 55 103-1, EN 61 547
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.