0 items in your cart
This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

Luminex GigaCore 14R With PoE Supply

Product Code LU0100038-POE
Manufacturer Luminex

Buy this from the A.C. Audio Online Store. Request more information or contact us now for purchasing information.


The GigaCore 14R is a Gigabit Ethernet switch designed to cope with the most demanding lighting and AV installations. Managed through a web interface, the device offers a user friendly experience with an industry specific oriented interface.
Fitted with two SFP cages, the switch can support any compliant fiber transceiver, breaking the limit of copper cable run. Two power backup ports at the rear of the unit makes the switch a reliable Gigabit core for your network. The GigaCore 14R comes with a bunch of industry oriented feature, providing a user friendly solution and lowering down set-up time.


  • 12 x 10/100/1000Mbps Ethernet connections on Neutrik Ethercon connector
  • (10 on the front , 2 at the rear)
  • 2 x SFP cages (Accept 100/1000Mbps compliant mini GBIC transceiver)
  • 1 x IEC power inlet
  • 1 x Molex Micro-Fit 6 pin connector for redundant PSU
  • 1 x Molex Micro-Fit 6 pin connector for redundant PoE supply
  • 1 x RJ45 for serial console port

Key Features

  • Wire-speed Layer 2 Switching
  • Sound protocol compliant: Low jitter
  • Industry specific web interface
  • RLinkX: Activate redundancy on ports to create secured links
  • Group: Create group within your network for a better network isolation*
  • MultiLinkX: Group ports together to increase the available bandwidth between two GigaCore switches*
  • Port status
  • 3 LEDs per port: PoE, RLinkX*, Link/Speed
  • 4 status LEDs for the device: OK, PoE, RLinkX*, Power
  • Redundant fans
  • Universal power supply: 100-240VAC


  • PoE supply unit: Deliver up to 100W through the 10 front Ethercon connectors
  • Backup PSU
  • Backup PoE supply unit

*available in a future release



  • Network: 12 x 10/100/1000Mbps shielded
  • Neutrik Ethercon connectors 
  • 10 on the front, 2 at the rear
  • 2 x SFP cages, compliant
  • with 10/100/1000Mbps Mini GBIC transceiver
  • 1 x serial RJ45 console port
  • Power: 1 x IEC inlet with fuse holder
  • 1 x redundant power input on
  • Molex Micro-Fit 6 pins connector
  • 1 x redundant PoE input on
  • Molex Micro-Fit 6 pins connector

Switch Features

  • Ethernet Compliance: IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet
  • Supported Protocols: IEEE 802.1p CoS (Class of Service)
  • PoE (802.3af) through optional module
  • Ethernet Switch Type: Full non blocking wire-speed switching performance
  • Memory: 4Mb
  • MAC Address Table: 8192 Entries
  • Address Learning / Aging: Self learning, Auto aging
  • SwitchingThroughput: 28Gbps
  • IGMP support: Yes (V1/V2)
  • IGMP Snooping: Available in a future firmware update

Port Features

  • Port Speed: Copper: 10/100/1000T
  • Fiber: 100/1000BaseX
  • Port Sensing: Auto negotiation
  • Auto Crossover: MDI / MDIX (allow to use straight or cross wired cable)
  • Auto Sensing: Full or Half Duplex (Gigabit is Full Duplex)

Status Report

  • Ethernet Port Connection: PoE (optional), RlinkX (Redundancy)
  • Link / Speed
  • Ethernet Port Speed: 100/1000Mbps LED
  • Device: Status LED
  • Power: Status LED
  • PoE: Status LED
  • RLinkX (Redundancy): Status LED


  • Configuration: Through built-in web server

Power Input

  • Power Input: 90-260VA
  • 47-63Hz
  • Backup Power Input: 15VDC / 2A on Molex Micro-Fit 6 pin connector
  • Backup PoE Input: 48VDC / 2.1A on Molex Micro-Fit 6 pin connector
  • Power Consumption: Maximum 30W
  • Maximum 130W with PoE Supply Unit
  • Fuse: 3.15A 250V Slow Blow
  • Power over Ethernet (PoE) support: Optional PoE Supply Unit


  • Operating Temperature: 0 to +60 °C
  • Storage Temperature: -10 to +70 °C
  • Humidity (non condensing): 5 to 95 % RH


  • Enclosure: Metal housing
  • Dimensions (W x D x H): 482 x 204,3 x 44 mm
  • 19" x 8.04" x 1.73"
  • Packaging: 520 x 235 x 50 mm

Additional informations

  • Approvals: CE, EN 55103-1, EN 55103-2, EN 60950-1, RoHS Compliance
    EN 60825-1 Safety of laser Products-Part 1
    EN 60825-2 Safety of laser products-Part 2
  • Order Reference: GigaCore 14R: LU01 00038
    GigaCore 14R with PoE output: LU01 00038-POE
  • Note: Luminex LCE operates a policy of continuous development. Luminex LCE reserves the right to make changes and improvements to any of the products described in this document above without prior notice.
    Specifications are subject to change without notice.

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.