0 items in your cart
This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

Martin FibreSource CMY150

The FiberSource CMY150 is an automated 150 W colour-changing luminaire for illuminating fiber optic cables in indoor and outdoor installations. It features seamless CMY colour mixing and full-range continuous dimming.

Product Code MA90523000
Manufacturer Martin Professional

Request more information or contact us now for purchasing information.


The new Martin FiberSource CMY 150 is a professional fibre illuminator for permanent outdoor and indoor installations. Full CMY colour mixing and unprecedented brightness combine to create new design possibilities for fibre applications.

Intended for permanent installations, the FiberSource CMY 150 is designed around a robust IP44 rated housing. It is based on a very efficient 150 W lamp giving 6000 hours of lamp life.

The FiberSource CMY 150 features an extremely broad colour spectrum achievable from a full CMY colour mixing system. Additionally, a full range dimmer gives the user an added effect dimension.

The large fibre port accepts up to 800 pieces of 1mm fibre optic cable. The fixture features DMX control and a very comprehensive stand-alone operation including real-time clock activation.

Key Features

  • 150 W metal halide lamp
  • CMY colour mixing system
  • 0-100% intensity control
  • Up to 800 fibre cables (1 mm)
  • Weatherproof rating: IP44
  • DMX, stand-alone, real time clock activation



Length: 398 mm (15.7 in.)
Width: 195 mm (7.7 in.)
Height: 197 mm (7.8 in.)
Weight: 8 kg (17.6 lbs.)


Type: 150 W metal halide
Approved lamps: Philips CDM-SA/R 150
Socket: Separate connector for integral lamp wires
Control: Automatic and/or remote on/off

Dynamic Effects

Colour mixing: CMY
Cyan: 0 - 100%
Magenta: 0 - 100%
Yellow: 0 - 100%
Dimmer: 0 - 100%

Control and Programming

Control options: DMX, stand-alone, synchronised (master/slave)
DMX channels: 7
Stand-alone trigger options: Internal timer and/or ambient light level
Stand-alone memory: 20 scenes
DMX address setting: Martin MUM™ application running on Windows PC
Stand-alone and master/slave programming: Martin MUM™ application running on Windows PC
Protocol: USITT DMX512/1990
Receiver: RS-485


Housing: Plastic, ABS
Colour(s): Anthracite grey (RAL 7016)
Protection rating: IP44


Indoor orientation: Any
Outdoor orientation: Horizontal
Minimum distance to combustible materials: 0.1 m (0.3 ft.)
Minimum clearance around fan and air vents: 0.2 m (0.7 ft.)


Power connection: 1.8 m (5.9 ft.) cable tail
Data connection: 1.8 m (5.9 ft.) cable tail with 3-pin XLR connectors


AC power: 100/120/210/230/250 V, 50/60 Hz
Main fuse: 5 AT (slow blow)

Typical Power and Current

100 V, 50 Hz: 220 W, 2.4 A
100 V, 60 Hz: 210 W, 2.2 A
120 V, 60 Hz: 220 W, 1.8 A
208 V, 60 Hz: 200 W, 1.0 A
230 V, 50 Hz: 210 W, 1.0 A
250 V, 50 Hz: 220 W, 0.9 A
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.


Maximum ambient temperature (Ta max.): 40° C (104° F)
Maximum surface temperature, steady state, Ta=40° C: 70° C (158° F)
Cooling: Filtered forced air cooling system
Total heat dissipation (calculated, +/- 10%): 750 BTU/hr.


US safety: UL 1598
Canadian safety: CSA C22.2 No. 250.0-00
EU safety: EN 60598-2-17 + Corr. A2
EU EMC: EN 55 015, EN 55 103-1, EN 61 547

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.