Bargains & Used Stock: Chroma-Q Chroma-Q 4Play 4 Way DMX Buffer
If you need further info please call either:
Jonathan Walters (Leeds) Tel: 0113 2557666
Peter Searles (High Wycombe) Tel: 01494 446000
Or email: bargains@ac-et.com
Description
The 4Play is a fault tolerant, self healing 4 way DMX buffer designed to fully isolate all outputs from each other. Supplied with 4 x 5 pin connectors, each output is separately generated and boosted from the original DMX signal. The 4Play is suitable for truss mounting with a normal hook clamp and will work with mains voltages world-wide. It also features a chassis mounted IEC male to assist international cabling.
Key Features
- 4 way DMX buffer
- Fault tolerant, self healing
- Each output fully isolated
- 4 x 5 pin XLR connector outputs
- 1 x 5 pin XLR connector input and through
- Each output is separately generated and boosted from the original DMX signal
- Data and power indicators
- Suitable for truss mounting with a normal hook clamp
Specifications
| Width | 148mm / 5.9" |
|---|---|
| Height | 158mm / 6.3" |
| Depth | 40mm / 1.6" |
| Power connector | 0.6kg / 1.3lbs |
| Weight | 100-240V 50/60Hz, 15W, IEC chassis male |
| DMX connector in/out | XLR5 |
| DMX connector out | XLR5 |
| DMX connector thru | XLR5 |
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.
