Williams Sound Digi-Wave Tour Guide System
One-way, wireless tour guide system in the 2.4 GHz band. Ideal for smaller tour groups of 11 or fewer members. Group members have listen-only capabilities. Enhances communication between tour guide and group members. Helps overcome background noise and distance from the tour guide. The system can be used in factories, museums, tourist attractions, or bus tours. Group members have listen-only capabilities.
(1) DLT 100 2.0 Transceiver*
(11) DLR 60 2.0 Receivers
(1) MIC 044 2P Headset Microphone
(11) EAR 022 Earphones
(1) CHG 1012 PRO multi-bay, drop-in charger with case
(1) CCS 044 Silicone Skin
(11) BAT 022-2 AAA rechargeable NiMH batteries
*Each DLT-100 2.0 is packaged with an individual charger.
Single-presenter/multiple-listener system – expandable to multiple presenters/unlimited participants
Completely portable – no base station required
Easy to use, push-to-talk functionality
Frequency-hopping technology subject to less interference -- offers greater reliability in an array of tour group applications.
Four independent tour groups can be operating simultaneously within a range of up to 100 feet outdoors/200 feet indoors (in 1- or 2-way mode, depending on environmental conditions). Outside of this range, other groups can be in operation.
Legal for use in most countries.
NiMH, 1.2 Volt, 950 mAh
chg 1012 pro
CHG 1012 (charger only): Â 9"L x 7"W x 1.6"H (23 cm L x 17.8 cm W x 4 cm H)Â
CHG 1012 PRO (case dimensions): Â 18â€ÂL x 14â€ÂW x 6.75â€ÂH (47.7 cm L x 35.5 cm W x 17.1 cm H)Â
CHG1012: 3.3 lbs (1.5 kg), including power supply
CHG1012 PRO: 9.4 lbs (4.26 kg), including power supply
Black, ABS plastic with metal base
Power Supply Input:
TFP 047, 90-240 VAC input, 1.5 A max *
Universal DC adapter, 5 VDC - 6A output, center positive
5 hours nominal **
Transceivers: DLT 300, DLT 100 2.0, DLT 100
Receivers: DLR 360, DLR 60 2.0, DLR 60
Charge status indicators on Â DLT or DLR
2 year (cables and power supply warranty for 90 days)
CE, FCC, WEEE, RoHS, CB
2 year (case, cables and power supply warranty for 90 days)
dlr 60 2.0 architectural and engineering specifications
The receiver shall be a digital receiver operating on the 2.4GHz ISM band utilizing GFSK modulation.It shall have the ability to communicate with the DLT 100 transceiver. It shall be housed in plastic enclosure 2.36â€Â W x 3.54â€Â H x 0.63â€Â D (60 x 90 x 16mm) and have an LCD on the front panel. It will have a 30-pin connector supporting audio output and charging capability. It shall support recharging of NiMH batteries when used with Williams Sound compatible chargers or docking station. The receiver shall have a battery life up to 24 hrs with two AAA Alkaline batteries, and up to 20hrs with two NiMH batteries. Power will automatically shut off after approximately one minute when not operating with other compatible devices. The receiver shall have a range of up to 200 ft indoors and up to 100 ft outdoors. The receiver shall have 3.5mm mono/stereo headphone jack with all controls on the front of the unit. The receiver shall operate 15 simultaneous channels and shall have a 65 dB (A weighted) S/N ratio with a frequency response 150 Hz to 11 kHz.
The receiver shall have FCC, CE, C-tick and Industrie Canada approvals and be RoHS and WEEE compliant. The receiver shall have a two year parts and labor warranty (90 days on headphones and earphones).
This receiver shall be the Williams Sound model DLR 60.
dlr 60 2.0
Â 2.36â€Â W x 3.54â€Â H x 0.63â€Â D Â (60 mm x 90 mm x 16 mm)
Â 1.7 oz. (47g) without batteries.
Â 2.4 GHz (ISM band)
Â GFSK digital transmission
Â Up to 100 ft outside, Up to 200 ft inside
Â Up to 15 simultaneous channels (one way mode)
Â Black ABS Plastic
Â Alkaline Disposable (BAT 010-2): Up to 27 hrs
Â NiMH Rechargeable (BAT 022-2): Up to 21 hrs
Â 2 x AAA Alkaline or NiMH
Â Auto Sleep Mode after 5 min of no RF signal
Â 150 Hz â€“ 11 kHz
Â 65 dB (A weighted)
Â 60 mW
Â 3.5 mm stereo jack with mono output for Headphones/Earphones
Â Back Speaker (muted when headphone jack in use)
Â Power, Volume +/-, Channel +/-, Setup, Battery Type
Â LCD shows status: Battery Level, RSSI, Group/Channel#
Â Red LED - blinks when charging
Â Green LED - stays on when charged
Â 30-pin iPod Style for charging and audio out
Â DLT 100
Â 32Â° â€“ 122Â°F Â (0Â° to 50Â°C)
Â CHG 102, CHG 1012, Digi-Dock
Â Silicone Skin, Lanyard, Wrist Strap
Â FCC, Industrie Canada, RoHS, CE, WEEE, C-tick
Â 2 years, parts & labor
dlt 100 2.0 architectural and engineering specifications
The transceiver shall be a digital transceiver operating on the 2.4GHz ISM band utilizing GFSK modulation with patented frequency-hopping software to reduce interference potential. It shall be housed in plastic enclosure, have an internal rechargeable Lithium Polymer battery with smart charge built into the transceiver and an LCD on the front panel displaying signal strength, battery level, mode and time. It shall have a built-in microphone and speaker for users opting not to use a headset.The transceiver shall have a battery life up to 14 hrs per charge and take approximately 5 hrs to reach full charge. Power will automatically shut off after approximately one minute when not operating with other compatible devices.The transceiver shall operate in one-way or two-way mode (two speakers in a group at any given time) and have a range of up to 200ft in two-way mode indoors and up to 100ft outdoors.The transceiver shall have power, vol +, vol -, talk, CH +, CH -, ^, GRP, v, buttons.The transceiver shall have an illuminated talk button.The transceiver shall have a menu setup mode via front panel buttons configurable for (1 or 2-way operation), (master or slave operation) and (floor and 14+ language portable interpretation where common floor language is used).The transceiver shall have 3.5mm mono/stereo microphone and headphone jacks, all controls are on the front of the unit and a multi-pin style jack on the bottom provides battery charging access. USB charger compatible with iPodÂ® chargers.The transceiver shall operate 15 simultaneous channels in interpretation mode and 4 simultaneous groups in two-way mode. It shall have a repeater mode to increase the range of the system.The transceiver shall have a 69dB (A weighted) S/N ratio with a frequency response of 150Hz to 11kHz.The transceiver shall have FCC, Industrie Canada, C tick and CE approvals and be RoHS and WEEE compliant.The transceiver shall have a two year parts and labor warranty (90 days on headphones, battery, charger and earphones).This transceiver shall be the Williams Sound model DLT 100 2.0.
dlt 100 2.0
103 x 62 x 11mm (4.1 x 2.4 x 0.4 inches)
80g (2.8oz) including battery
Black and silver
Shatter resistant PC/ABS plastic
Li Polymer with smart charge built into transceiver
Up to 14hrs talk time per charge
5hrs. TFP 045 with cable and international adapters
Optional two-bay charger CHG 102
Up to 15 simultaneous channels (Interpretation mode)
Up to 4 simultaneous groups (2 way mode)
2.4GHz (ISM band) 2.402 â€“ 2.476GHz FHSS
150 â€“ 11KHz
69dB (A weighted)
Internal microphone (disabled when MIC jack engaged) and 3.5mm stereo jack
(tip/sleeve) with electret microphone bias, adjustable gain with 63dB range.
Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041)
Internal speaker (disabled when ear jack engaged)
16mW @ 33Î©
Up to 100ft outdoors and 200ft indoors*
GFSK, binary CDMA
87 bit encryption
Front push buttons for volume up/down, quick group select, menu access and selection, MIC on/off, power on/off, tone control, side-tone adjustment, SLOC access and Secure Key access. System reset button (rear of unit).
3.5mm stereo/mono jack 30 pin charging jack
Adjustable: Off (0dB), -6dB, -12dB below volume
Internal speaker (disabled when ear jack is engaged)
LCD (Group, channel, volume level, battery status, mode, signal strength)
(charge status, voting) Red LED around talk button when enabled. Amber LED signifying voting feature activated.
Two presenters at any given time
FCC, Industrie Canada, CE, C-tick, RoHS, WEEE
2 years parts and labor (90 days on accessories)
20 - 20kHz
Max Power Input
118 dB @ 1kHz
mic 044 2p
74 g (2.6 oz)
2 x 3.5mm
150 - 18kHz
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.