Williams Sound Digi-Wave DLR360 Receiver - No Earphones or Batteries Included
The conveniently rechargeable DLR 360 Receiver is for listen-only applications. Simple to set up and use. Features automatic mode selection and shut-off. Large LCD screen displays channel, volume, battery level and RF signal strength. Receives up to two presenters simultaneously during team presentations. Can be used with earphones, headphones, neckloop or built-in speaker. Add any quantity for larger groups. Uses (2) AAA Alkaline or NiMH batteries.
Williams Sound Digi-Wave DLR-360 Features:
Large LCD display – easy to read status and manage settings
Quick Group Change - change groups without the need to access a menu
Sleek, lightweight design - easy to carry and use
Please note that batteries are sold separately
dlr 360 architectural and engineering specifications
The receiver shall be a digital receiver operating on the 2.4GHz ISM band. It shall have the ability to communicate with the DLT 300 transceiver.
The receiver shall be housed in plastic enclosure 3.54” H x 2.36” W x 0.63” D (90 mm x 60 mm x 16mm) and have an LCD on the front panel. It will have a 30-pin connector supporting audio output and charging capability. It shall support recharging of NiMH batteries when used with Williams Sound compatible chargers or docking station.
The receiver shall have a battery life up to 24 hrs with two AAA Alkaline batteries, and up to 18 hrs with two NiMH batteries. It’s power will automatically shut off after approximately five minutes when no RF signal is detected from any compatible devices.
The receiver shall have 3.5mm mono/stereo headphone jack with all controls on the front of the unit. The receiver shall operate 15 simultaneous channels and shall have a 65 dB (A weighted) S/N ratio with an audio frequency response of 140 Hz to 11.5 kHz in Conference Mode and Interpreter Mode, and 140 Hz - 7.6 kHz in Intercom Mode.
The transceiver shall have power, vol +, vol -, v and ^ buttons.
The transceiver shall have FCC, Industry Canada, CE approvals and be RoHS, WEEE and RCM compliant.
The receiver shall have a two year parts and labor warranty (90 days on headphones and earphones).
This receiver shall be the Williams Sound model DLR 360.
These specifications are Preliminary and may be subject to change without notice.
2.36” W x 3.54” H x 0.63” D
(60 mm x 90 mm x 16 mm)
1.7 oz. (47 g) without batteries.
2.4 GHz (ISM band)
Up to 15 simultaneous channels (one way mode)
Black ABS Plastic
2 x AAA Alkaline or NiMH
Alkaline Disposable (BAT 010-2): Up to 24 hrs
NiMH Rechargeable (BAT 022-2): Up to 18 hrs
Auto Sleep Mode after 5 minutes of no RF signal from compatible devices
Audio Frequency Response:
(-3dB knee level)
Conference Mode: 140 – 11.5 KHz
Intercom Mode: 140 – 7.6 KHz
65 dB (A-weighted)
Headphone Audio Output:
3.5 mm stereo jack with mono output for headphones, earphones, or neckloop
27 mW maximum @33Ω mono
Internal Speaker (disabled when headphone jack in use)
Power, Volume +/-, Channel +/-, Setup, Battery Type
LCD shows status: Battery Level, RSSI, Group/Channel#
Red LED - blinks when charging
Green LED - stays on when charged
30-pin iPod Style for charging and audio out
DLT 300 only
32° – 122°F (0° to 50°C)
2-bay CHG 102, 12-bay CHG 1012, TFP 045
Silicone Skin, Lanyard, Wrist Strap
FCC, Industry Canada, RoHS, CE, WEEE, RCM
2 years parts and labor (90 days on accessories)
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.