PreSonus SCEPTRE S6 (Per Speaker) 2-Way 6.5 Inch Coaxial Nearfield Monitor With DSP Processing
The first time you hear Sceptre-series CoActualTM 2-way studio monitors, you'll discover fine nuances of your music that can't be reproduced by conventional designs. The Sceptre's panoramic soundstage, fine detail, and stunning dynamics will astonish you.
Coaxial designs offer the advantages of a single point source for a consistent acoustic center and a symmetrical dispersion pattern. But designing coaxial systems without acoustic anomalies has been extremely expensive-until now.
Each Sceptre monitor contains a DSP chip that enables the use of Fulcrum Acoustic's TQ algorithms. The result is speakers that deliver the full benefits of coaxial design.
Sceptres provide extensive user-adjustable contour features that let you optimize the monitors for any mixing space.
The Sceptre series includes two models with the same high/mid coaxial section. The S6 delivers far better bass response than you'd expect for its size. The S8's bass response is downright stunning.
Combines DSP time-correction and point-source design for symmetrical soundstage and micro-definition imaging
Unique coaxial transducer integrates 8-inch (Sceptre S8) or 6.5-inch (Sceptre S6) midrange driver and 1-inch (25 mm), horn-loaded HF transducer with Coaxial Speaker Coherence Alignment
Powerful DSP provides critical Temporal EqualizationTM with multiple FIR filters
HF Driver Adjust (0 dB, +1 dB, -1.5 dB, -4 dB)
Acoustic Space settings (0 dB, -1.5 dB, -3 dB, -6 dB)
High-pass filter (Off, 60 Hz, 80 Hz, and 100 Hz, -24 dB/octave slope)
Sensitivity (+4 dBu to -10 dBV)
Power and safety
180W RMS, Class D biamplification with internal heat sink
102 dB maximum continuous SPL
RF shielding, current-output limiting, and over-temperature protection
Amplifier "soft start" feature eliminates popping on power-up
Internal power supply with IEC connector
Power switch with on/off LED
Inputs and outputs
Balanced XLR and ¼-inch TRS line-level inputs with A-taper level control
1- Balanced XLR
1- Balanced ¼" TRS
Frequency Response (-3 dB) 52 Hz - 20 kHz
Frequency Response (-10 dB) 42 Hz - 23 kHz
Crossover Frequency 2.2 kHz
LF Amplifier Power (@ 4Ω)90W
HF Amplifier Power (@ 4Ω)90W
Peak SPL (@ 1 meter)109 dB
LF Driver 6.25" glass-reinforced paper
HF Driver 1" diaphragm compression driver
Input Impedance 10 kΩ
Volume Range A-type taper
HF Control Flat, +1, -1.5, -4 dB
Low Cut Flat, 60, 80 Hz, 100 Hz
Acoustic Space Flat, -1.5, -3, -6 dB
External mains fuse
100-120V ~50/60 Hz or 220-240V ~50/60 Hz
Vinyl-laminated, medium-density fiberboard
Width 9" (230 mm)
Depth 12.2" (310 mm)
Height 13.2" (335 mm)
Weight 18.8 lbs (8.53 kg)
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.