Apart CM20T 2-Way 20w 100v Built-In Loudspeaker, White
The CM20T two-way built-in loudspeaker can be used as a 16 ohms or 100 volt loudspeaker. In 16 ohms use, you can connect up to 4 loudspeakers in parallel on each channel of a standard 4 ohms amplifier. For 100 volt use, the CM20T is equipped with a high-quality 20 watts 100 volt transformer with several power tappings (20 – 10 – 5 – 2.5 watts). Therefore it can be used in projects with high ceilings or places with background noise where a little more power is needed.
The loudspeaker has a 6.5” enforced polypropylene woofer what results in a very low distortion. To complete the sound, a 1” tweeter has been integrated. It makes the CM20T very suitable for the distribution of microphone calls and background music.
The housing is made of high quality ABS. The woofer is made out of enforced polypropylene, what makes it moisture-proof.
|Outside diameter||205 mm|
|Woofer size||6,5 inch|
|Woofer cone material||polypropylene|
|Tweeter size||1 inch|
|Mounting system||3 screws|
|100V transformer power taps||120 - 10 - 5 - 2.5 watts|
|Low impedance dynamic power||60 watts|
|SPL 1W/1m||86 dB|
|Max SPL 1m||104 dB|
|Frequency response||60 - 20K Hz|
|Main construction material ABS||plastic|
|Grille main material||aluminium|
|Applicable low impedance||Yes|
|Applicable in 100V||Yes|
|Vertical dispersion angle 1000 Hz||180°|
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.