DB Technologies DVA T2 (White)
A three-way active line array system, the DVA T4 has set new standards in the sound reinforcement industry since its 2007 market launch.
Better yet, it has brought the benefits of real line array technology to a much wider range of users.
Equipped with top-notch features and engineered for maximum versatility, the DVA T4 delivers premium performance and ensures excellent return on investment.
Active Line Array 420 Watt RMS
The DVA T4 is equipped with unique digital power amps that provide a total of 420W RMS. Driven by Digipro® technology, their resolution is several-fold that of conventional digital amps.
They render signals very accurately with this high-definition audio capability.
Sonic images are almost impossible to distinguish from those of analog sources, even in the HF range. The amps are equipped with high-quality delta-sigma converters.
The DVA T4‘s digital power amp features DPP™ (Digital Power Processing) technology and a multiband compressor/ limiter with separate response curves for each signal path. Its dynamic range is exceptionally wide.
For example, headroom in the middle and high-frequency bands ranges up to 22dB.
This innovative circuitry not only maximizes dynamic response, it also ensures signals are rendered accurately and uniformly even at threshold levels.
The 8" Neodymium-Woofer is equipped with a high power 2.5" voice coil to provide superior sound pressure level in a very compact size.
The 6.5" Neodymium-Midrange speaker has a sealed basket to provide an optimized volume capacity including high sensitivity and superb sound reproduction.
It also has a horn exit including phase plug for defined and linear sound emission.
The build in 1"Neodymium- Drivers are equipped with a 1.4" Mylar- Membrane which allow a very quick response and provide a linear frequency range at a surprisingly low weight.
This driver was specially designed for the use with Line- Arrays. Its compact measurements allow very close proximity which is a main factor for minimum interference.
- Speaker Type: 3-Way Active Line Array Module
- Frequency Response [+/- 3dB]: 80 - 19.000 Hz
- Max SPL: One Unit: 128dB
- HF: 2x1"
- Voice Coil HF: 1.4"
- Directivity: 100x15° Single unit
- MF: 1x 6.5"
- Voice Coil MF: 1.5"
- LF: 8"
- Voice Coil LF: 2.5"
- Amp Technology: Digipro®
- Amp Class: Class D
- HF Amp: 100W RMS
- MF Amp: 100W RMS
- LF Amp: 220W RMS
- Cooling: Convection
- Controller: Analog Devices
- AD/DA Converter: DSP 24 bit/48 kHz
- System Presets: 8, HF/Low-mid correction
- Limiter: Dual Active Limiter Multiband RMS, Peak, Thermal
- Crossover Frequency MF-HF: 1800 Hz
- Slope MF-HF: 24dB/Octave
- Crossover Frequency LF-MF: 400 Hz
- Slope LF-MF: 24dB/Octave
- Signal Input: 1x XLR fem, Bal.
- Signal Output: 1x XLR male, Bal.
- Power Socket: 1x Powercon In 1x Powercon Out
- Voltage Range: 90 - 240V
- Housing: Polypropylen PP reinforced
- Housing Design: Trapezoidal 15°
- Rigging Points: Integrated rigging hardware
- Width: 580mm (23.2in)
- Height: 240mm (9.6in)
- Depth: 327mm (13.08in)
- Weight: 13.8kg (30.42lbs)
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.