0 items in your cart
This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

Sennheiser e 912 S Boundary Microphone

Product Code SE500875
Manufacturer Sennheiser

Buy this from the A.C. Audio Online Store. Request more information or contact us now for purchasing information.


The e 912 S is a high-quality, pre-polarised condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech. Due to its unobtrusive, flat design, it is ideally suited for use on conference tables, altars and lecterns.

The e 912 S can be switched on and off via an integrated membrane switch.


Programmable membrane switch
Very unobtrusive due to flat design
Extremely rugged sound inlet basket
Rubber damping plate on base
Mounting slots for mounting the microphone to table tops, lecterns, etc.
Gold-plated XLR connector
Integrated electronics (instead of in-line preamp)
An internal DIP switch bank provides the following features: on/off (factory preset), push-to-talk button (PTT), cough button (PTM) or permanently switched on (ON)
The frequency response curve can be changed via a second DIP switch bank: low cut, low and high boost (factory preset), low boost or linear (see e 912).
The e 912 S has been optimized for picking up speech at relatively short distances, while the sister model e 916 has been designed for instrument pick up. For this reason, the frequency response curve of the e 912 S differs from that of the e 912.
With the e 912 S, you can obtain the frequency response curve of the e 912 by setting the DIP switch to the position lin (linear).

Impedance: < 100 Ohm
Dimensions: 126.5 x 105 x 26.5mm
Connector: XLR-3
Frequency response (microphone): 20 Hz - 20 kHz
Transducer principle (Microphone): pre polarised condenser microphone
Weight: 550g
Pick-up pattern: half-cardioid
Sensitivity in free field, no load (1kHz): 6 (10) mV/Pa Depending on adjusted frequency response curve.
Min. terminating impedance: 1 kOhm
Phantom powering: P48
Equivalent noise level: 26 dB (A)
Equivalent noise level weighted as per CCIR 468-3: 37 dB
Maximum sound pressure level (passiv): 134 dB SPL
Current consumption: 2,8 mA

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.


No related products

No accessories

A.C. Audio Online Shop