0 items in your cart
This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

Audio-Technica ATW-2410AP 2000a Series Racked System With 4 Tie-Clip Microphones

Product Code AUATW-2410AP
Manufacturer Audio-Technica

Request more information or contact us now for purchasing information.

Description

This Audio-Technica racked and ready system consists of the following:

4 x ATW-T210a body-pack transmitters

4 x AT829cW tie-clip microphones

4 x ATW-R2100a receivers

ATW-DA49 distributor, rack box and transmitter shoulder bag.

4 channels of 2000a series wireless systems and professional antenna distribution system all pre racked into a high quality flight case. All system settings are preprogramed into the units so all you need to do is plug in and turn on. All systems come with a padded shoulder bag for safely storing the microphone and belt pack transmitters. Only available in the UK.

Please note that the image shown does not reflect the configuration of this system. No handheld transmitters are included, only lapel microphones and beltpacks. 

Specifications

Overall System
• Operating Frequencies: UHF band
606.500 - 629.900 MHz (U Band - ch.38)
856.100 - 864.900 MHz (F Band)

• Number Of Channels: 10 total
• Frequency Stability: ±0.005%, Phase Lock Loop frequency control
• Modulation Mode: FM
• Operating Range: 100 m (300') typical
• Operating Temperature Range: 41° F (5° C) to 113° F (45° C)
• Frequency Response: 100 Hz to 15,000 Hz

Receiver Specifications
•Receiving System: True diversity
• Image Rejection: 55 dB nominal, 50 dB minimum
• Signal-To-Noise Ratio: >100 dB at 40kHz deviation (A-weighted), maximum modulation 40 kHz
• Total Harmonic Distortion: < 1% (at 1 kHz, ±20 kHz deviation)
• Sensitivity: 20dBuV (S/N 60dB at 5 kHz deviation, IEC-weighted)
• Audio Output: Unbalanced: 25mV (100k ohms load), 1/4" phone jack
Balanced: 50mV (Attenuator; 0dB)
12.5mV (Attenuator; -12dB) at 1 kHz ± 5kHz
deviation, 100k ohm load, XLRM-type
• Antenna Input: BNC-type 50 Ohms - Bias voltage 12V DC, 60mA each
• Dimensions: 210 mm x 44 mm x 162.2 mm (W x H x D)
• Weight: 1.0kg (2.2 lbs)
•Accessories Furnished: Two flexible UHF antennas, rack mount adapters, AC adapters
• Optional System Accessory: AT8630 joining-plate kit, mounts two ATW-R2100a receivers in single 19" rack space 

Body-Pack Transmitter
•RF Power Output: High: 30mW; Low: 10mW, nominal
•Spurious Emissions: According to National Regulations
•Batteries: Two 1.5V AA alkaline or rechargeable AA NiMH (not included)
•Current Consumption: 150 mA typical
•Battery Life: Approximately 9 hours (low), 7 hours (high)
•Dimensions: 66 mm x 92.3 mm x 22.5 mm (W x H x D)
•Weight (Without Battery): 80 grams

Handheld Transmitter
•RF Power Output: High: 30mW; Low: 10mW, nominal
•Spurious Emissions: According to National Regulations
•Microphone Element: Dynamic, unidirectional
•Batteries: Two 1.5V AA alkaline or rechargeable AA NiMH (not included)
•Current Consumption: 150 mA typical
•Battery Life: Approximately 9 hours (low), 7 hours (high)
•Dimensions: 229 mm long - 53.5 mm maximum diameter
•Weight (Without Battery): 221 grams
•Accessory Included: AT8456a Quiet-FlexTM Stand Clamp

 

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.