0 items in your cart
This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

AKG D770 Unidirectional Handheld Dynamic Microphone

Product Code AKD770
Manufacturer AKG

Buy this from the A.C. Audio Online Store. Request more information or contact us now for purchasing information.


  • High-output neodymium transducer
  • Rugged construction
  • Highly efficient windscreen
  • Frequency response optimized for intelligibility

Dynamic microphone for miking instruments and backing vocals in tough night-after-night onstage use. The D 770 features a cardioid polar pattern that is virtually the same for all frequencies ("frequency independent") and uses a patented AKG Varimotion diaphragm.

The D 770 is fitted with a shock absorbing steel wire-mesh inner grill and a wire-mesh outer grill for transducer protection against damage.

The outer grill and a layer of special fabric beneath it form a very effective windscreen that will suppress pop and breath noise as well as sibilance. The extended frequency response of the D 770 slightly emphasizes the mid and treble ranges to ensure good intelligibility.

A.C. Audio Online YouTube Channel Banner


  • Polar pattern: cardioid
  • Frequency range: 60 to 20,000 Hz
  • Equivalent noise level (IEC 60268-4, A-weighted): 22 dB (A) to DIN 45412
  • Impedance: <=600 ohms
  • Recommended load impedance: >=2000 ohms
  • Connector: 3-pin male XLR
  • Finish: matte black enamel
  • Net weight: 290 g / 10.4 oz.
  • Shipping weight: 650 g / 1.4 lbs.
  • Patent(s): Varimotion - multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637) (DE, DK, FI, FR, GB, IT, NL)

The microphone shall be a unidirectional dynamic microphone with a neodymium magnet. It shall be provided with a detachable cap for easy cleaning of the windscreen, and a transducer shock mount for suppression of cable and footfall noise. The frequency response of the microphone shall be designed for general miking use. The microphone shall have a frequency range from 60 to 20,000 Hz; sensitivity at 1 kHz of 2.5 mV/Pa; electrical impedance of 600 ohms. Its length shall be 181 mm (7.1 in.), its maximum diameter 50 mm (2 in.). The microphone shall have a net/shipping weight of 290/650 g (10.4 oz./1.4 lbs.) and matte black finish. The microphone shall be the AKG D 770.

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.