0 items in your cart
This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

ART SPLITMIX 4 - 4 Channel Personal Mixer

Description

ART Split Mix 4 Mini Mixer 

The ART Split Mix 4 Mini Mixer is a four channel passive splitter/ mixer and offers a wide variety of configurations. 

Mix 4 stereo input channels down to 1 stereo output, split a stereo input signal to distribute 4 stereo output channels, or combine the configurations for a wide range of applications. You can even configure the SPLITMix4 as 4 stereo input channels thru 4 independent level attenuators to 4 stereo output channels.

Independent stereo level controls are provided on each channel. All 1/4-inch connections are stereo TRS (Tip, Ring, Sleeve) and all channel connections have intelligent switching to allow for a wide variety of configurations. Plugging into a mix input channel removes it from the splitter bus, and plugging into a splitter output channel removes it from the mix bus. Stereo or mono operation is determined by the type of 1/4-inch plug and cabling that you use.

The fully passive design of the SPLITMix4 has no active circuitry to add noise or distortion, and virtually any signal level can be handled. The Level attenuators cover a wide range and offer over 90dB of attenuation and channel isolation. The SPLITMix4 is designed primarily as a line level device with medium input and output impedances.

Contact a member of the AC Audio sales team for more information on ART products

A.C. Audio Online YouTube Channel Banner

 

Specifications


Input Impedance 25k -100k Ohms
Ouput Impedance 1k - 4k Ohms
Connectors 1/4-inch TRS stereo
Power Requirements Fully Passive
Total Harmonic Distortion <0.005% @ 1kHz (typical)
Frequency Response 20Hz - 20kHz, +/-1dB
Phase <10 degrees @ 20kHz
Insertion Loss 12dB (typical)
Maximum Attenuation > 90dB (typical)
Channel Isolation > 90dB (typical)
Dimensions 1.85x4.6x4.1" (47x117x104mm)
Weight 0.84 lbs (0.38 kg)

Four Stereo Input Channels
Stereo Output
Independent stereo level controls are provided on each channel
Passive Design (No Power Supply Required)
Over 90dB of Attenuation

 

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.

Downloads

No downloads

No related products

No accessories

A.C. Audio Online Shop