ART Promix - Microphone Mixer (3 Channel)
Problem: You need to add 3 mics to a mixer, which only has one available channel.
Solution: Insert a ProMIX between the mics and the mixer. Each mic channel on the ProMIX has both phantom power and low-frequency cut selectable via DIP switches plus a level control. The balanced XLR line output can be connected to a mic input on the mixer and headphones or a powered monitor can be connected to the Phone/Aux output. And if AC power is not available, the ProMIX runs on batteries as well.
Maximum Gain +60dB
Input Impedance 600 ohms
Maximum Input Level -14dB
Maximum Output Level +14dB
Output Impedance 600 ohms
Total Harmonic Distortion 0.0002
Low Cut -3dB @ 100Hz
Clip Headroom 3dB
Output Phantom Power 12V DC
Power 12V DC (adapter) / 2x 9V (batteries)
Dimensions 5.625x3.75x1.75 inches (143mm x 92mm x 45mm)
Weight 1.5lb (680g)
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.