0 items in your cart
This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

LD Systems DDQ Sub212, 2 x 12 Inch Active PA Subwoofer With DSP

Product Code ADLDDQSUB212
Manufacturer LD Systems

Buy this from the A.C. Audio Online Store. Request more information or contact us now for purchasing information.


The LD Systems DDQ Sub 212 is a powerful active subwoofer with two specially developed 12" bass speakers and digital signal processing, specially conceived for use in combination with the full-range speakers of the DDQ Series. It ensures deep bass reproduction in PA systems and can also be matched to the satellites/tops of other manufacturers.

The two woofers with 3" coils and neodymium magnets are driven by two 700-watt Hypex Class D power amplifier modules with a highly efficient switching power supply and a RMS output of 1400 watts. The DDQ Sub 212 attains a maximum sound-level pressure of 132 dB over a frequency response curve of 38 - 120 Hz.

The Sharc DSP programmed especially for the DDQ subwoofers has a large dynamic range of 127dB/113 dB (ADC/DAC) and handles frequency and phase correction in addition to providing extensive protection functions for reliable operation. Its 1ms look ahead limiter provides for distortion-free reproduction even at maximum volume levels. Seven DSP Presets permit selectable crossover frequencies between 80 and 120Hz. Eight additional presets make it possible to realize cardioid configurations of 2 or 3 subwoofers, whereby it is possible to attain rear attenuation of up to 20dB. The inputs and outputs as well as the separate mono output with a 100Hz high-pass filter use Neutrik XLR sockets. Additional features are LED function indicators and a ground lift switch; the volume and preset encoders can be deactivated to prevent inadvertent adjustment.

The compact band-pass enclosure of the DDQ Sub 212 is made of 18mm thick multiplex with an extremely durable polyurethane finish. It is prepared for mounting of casters and features comfortable handles and two M20 threaded flanges.


  • Product number: LDDDQSUB212
  • Product type: PA subwoofer
  • Type: Actives
  • Design: DSP controlled
  • Low/mid driver dimensions: 2 x 12"
  • Low/mid driver dimensions (mm): 2 x 304.8 mmmm
  • Woofer magnet: Neodymium
  • Woofer brand: Custom-made
  • Woofer voice coil: 3"
  • Woofer voice coil (mm): 76.5mm
  • Amplifier: Class D
  • RMS: 1400 (2 x 700)W
  • Frequency response: 38 - 120Hz
  • Max. SPL (continuous): 124dB
  • Max. SPL (peak): 132dB
  • Protection circuits: over-current, RMS speaker limiter, short circuit, DSP-based "look ahead" limiter, RMS power supply limiter
  • Controls: Gain, DSP/ Gain enable, DSP presets, ground lift, Power
  • Indicators: DSP/ Gain disable, Peak Limit, signal, Operate
  • Line inputs: 2
  • Line input connectors: XLR
  • Line outputs: 3 (2x Input Link, 1x Sat Out with 100Hz high-pass)
  • Line output connectors: XLR
  • Operating voltage: Switching Power Supply, 180 - 264 V ~ / 47 - 63 Hz
  • Cabinet material: 18 mm Plywood
  • Cabinet surface: Polyurethane
  • Cabinet construction: Bandpass
  • Width: 420mm
  • Height: 620mm
  • Depth: 543mm
  • Weight: 34.5kg
  • Features: 2 x threaded flange (M20), 3 x corner handles, prepared for mounting of casters, 15 x DSP presets with 4 selectable cardioid setups and 7 selectable crossover frequencies (80-120Hz)



Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.


No downloads

No related products

No accessories

A.C. Audio Online Shop