HK Audio DSM2060 Digital Management System
The HK AUDIO® DSM 2060 Digital Speaker Management System is a digital controller rich in practical features for both touring and fixed installations. With its innovative HFTTM Hardman Filter Technology, it exceeds standard requirements and offers the kind of high-end audio quality that until now could only be obtained from considerably higher priced units.
The HK AUDIO® DSM 2060 system incorporates high-end 24-bit, 96-kHz converters that ensure extremely accurate and natural digital signal processing and a frequency response up to 40 kHz. The two inputs and six outputs can be configured separately for front-of-house and monitor use in touring applications, and likewise allow for a great deal of flexibility in fixed installation projects. To best meet the needs of any given venue, you can apply as many as six parametric EQs plus two shelving filters to each input and output channel. To facilitate setup of delay zones and time alignment of loudspeaker components in multiamped systems, the DMS 2060 offers input delays up to 400 ms and output delays up to 80 ms. For greater speaker and driver protection different limiters can be applied to each output in steps as fine as 0.2 dB. Attack and release times of these limiters are optimally preconfigured. At the heart of the controller is a comprehensive set of crossover types, including Butterworth, Bessel, and Linkwitz- Riley, with selectable slopes from 6 to 24 dB.
Unique to the HK AUDIO® DSM 2060 are the fourth-order and eighth-order HFTTM filters that create crossover slopes of 36 dB and 52 dB. But unlike other steeply sloped filters, the HFTTM crossover achieves absolutely minimal phase shift and group delay, even at maximum slopes, thereby maintaining an extraordinarily natural-sounding signal. As a result, HFTTM produces exceptionally smooth response in the crossover region and faster roll-off rates, which in turn minimise distortion, permit lower crossover frequencies and safely expand the effective frequency range of the drivers. This technology allows you to take maximum advantage of your sound system's headroom and increase its operational reliability at the same time.
Output impedance: 35 ohms, balanced to ground
Frequency response: 10 Hz - 40 KHz, +/- 3 dB
Limiters: High-perform. limiter, threshold adjustable in 0.2 dB steps
Delay: Input 400 ms, Output 80 ms
Model DSM 2060
Headline Digital Speaker Management System
Max. input level +20 dBu
Max. output level +22 dBu 600 Ohm
Frequency response +/- 3 dB 10 Hz - 40 kHz, +/- 3 dB
Input impedance 9 kOhm
Output impedance 35 Ohm
Connections 2x In, 6x Out
Mains voltage/ frequency 100- 240 V / 50- 60 Hz
Power consumption 40 VA
Dimensions (WxHxD) 48 x 4,4 x 25,4 cm (19")
Weight 2,7kg / 6,1 lbs.
Filter type IIR
Max input (dBu) dynamics >112 dB (A-weighted), 22 kHz Bandwidth
Internal bit depth 24 Bit
Sampling rate 96 kHz
Protocol AES 3 (AES/EBU)
Delay 400ms IN, 80ms OUT
Network 38,4 kBaud, Format: 8 Data, 1 Stop, no parity
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.