0 items in your cart
This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

Audio-Technica ATW-2110/P3 UniPak System With MT838cW

Product Code AUATW-2110/P3
Manufacturer Audio-Technica

Buy this from the A.C. Audio Online Store. Request more information or contact us now for purchasing information.

Description

ATW-R2100 receiver, ATW-T210 UniPak® body-pack transmitter, MT838cW omnidirectional condenser lavalier microphone.

2000 Series:

Automatic frequency scanning finds an open channel at the touch of a button

Available in two frequency bands:
840.000 - 865.000 MHz (F Band).
795.000 - 820.000 MHz (E Band)

True Diversity operation selects the better signal from two independent receiver sections, reducing dropouts

Tone LockTM tone squelch system fights interference

Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering

Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear

Includes rack-mount kit and detachable UHF antennas

Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver

ATW-T220 Handheld Microphone/Transmitter features PRO 41 capsule for maximum feedback rejection and consistent sound

 

Specifications

OVERALL SYSTEM SPECIFICATIONS
Operating Frequencies UHF band
840.000 - 865.000 MHz (F Band)
795.000 - 820.000 MHz (E Band)
Number of Channels 10 total
Frequency Stability ±0.005%, Phase Lock Loop frequency control
Modulation Mode FM
Normal Deviation ±5 kHz
Operating Range 100 m typical
Operating Temperature Range 41° F (5° C) to 113° F (45° C)
Frequency Response 100 Hz to 15 kHz
RECEIVER SPECIFICATIONS
Receiving System Dual independent receivers, automatic-switching diversity
Image Rejection 55 dB nominal, 50 dB minimum
Signal-to-noise Ratio >100 dB at 40 kHz deviation (A-weighted), maximum modulation 40 kHz
Total Harmonic Distortion <=1% (10 kHz deviation at 1 kHz)
Sensitivity 20 dBµV (S/N 60 dB at 5 kHz deviation, IEC-weighted)
Audio Output Unbalanced: 25 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
Balanced: 12.5 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
Output Connectors Unbalanced: 1/4" TS ("mono") phone jack
Balanced: XLRM-type
Dimensions 8.27" (210.0 mm) W x 1.73" (44.0 mm) H
x 6.39" (162.2 mm) D
Weight 2.2 lbs (1.0 kg)
Accessories Included Two flexible UHF antennas, rack-mount adapters, AC adapter
BODY-PACK TRANSMITTER SPECIFICATIONS
RF Power Output 10 mW
Spurious Emissions According to National Regulations
Batteries Two 1.5V AA alkaline (not included)
Current Consumption 150 mA typical
Battery Life Approximately 9 hours (depending on battery type and use pattern)
Dimensions 2.60" (66.0 mm) W x 3.63" (92.3 mm) H x 0.89" (22.5 mm) D
Net Weight 2.8 oz (80 grams)
HANDHELD TRANSMITTER SPECIFICATIONS
RF Power Output 10 mW
Spurious Emissions According to National Regulations
Microphone Element Dynamic cardioid
Batteries Two 1.5V AA alkaline (not included)
Current Consumption 150 mA typical
Battery Life Approximately 9 hours (depending on battery type and use pattern)
Dimensions 9.02" (229.0 mm) long x 2.11" (53.5 mm) maximum diameter
Net Weight 7.8 oz (221 g)
Accessory Included AT8456a Quiet-FlexTM Stand Clamp

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.