Audio-Technica ATW-1311 Pro Rack, Dual Channel Bodypack System
Audio-Technica’s System 10 PRO rack-mount digital wireless system provides wireless that’s so simple to use, so dependable, and so automatic, you never have to think about it. Set it up anywhere, turn it on and it’s good to go.
System 10 PRO delivers interference-free operation in the 2.4 GHz range (i.e., outside TV bands) with many innovative features for ultimate versatility. The durable half-rack chassis houses two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable.
Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.
Like all the products in the System 10 wireless family, the System 10 PRO rack-mount features 24-bit/48kHz operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time and space.
Operates outside TV bands
3 Levels of Diversity Assurance
Transceiver Technology – each receiver + transmitter sends and receives signals – staying in constant communication with one another. This allows the system to change frequencies whenever needed.
Ready to go straight out of the box
Full-bandwidth high-fidelity audio
Users can pair each receiver with up to 10 transmitters
Continuously monitors 2.4 GHz range to avoid interference with existing wireless systems
ATW-1311 Dual Body-pack System
ATW-RC13, ATW-RU13 x2, ATW-T1001 x2
Operating Frequencies: 2.4 GHz ISM band
Dynamic Range: >109 dB (A-weighted), typical
Total Harmonic Distortion: <0.05% typical
Operating Range: 60 m (200') Open range env. with no interfering signals
Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
Frequency Response: 20 Hz to 20 kHz Depending on microphone type
Audio Sampling: 24 bit / 48 kHz
Latency: 3.8 ms
Receiving System: Diversity (frequency/time/space)
Output Connectors (Microphone): Remote Receiver Connector: RJ45 / Link Connector RJ12
Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
Dimensions: 209.8 mm (8.26") W x 44 mm (1.73") Hx 169.3 mm (6.67") D
Accessories Included: Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet
RF Output Power: 10 mW
Spurious Emissions: Following federal and national regulations
Input Connection: Four-pin Locking Connector, Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Batteries (not included): Two 1.5V AA
Battery Life: >7 hours (alkaline) Depending on batt. type & use pattern
Dimensions: 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Net Weight (w/o batteries): 100 grams (3.5 oz)
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.