Audio-Technica AT8801 Single Channel 48v DC Phantom Supply
The AT8801 provides 48V phantom power for a single microphone. It is a line-powered device that allows the use of remote-powered microphones with systems that do not supply phantom power.
Highly regulated power supply provides a constant voltage source, even with a heavily loaded input
The regulator IC is internally protected to prevent overheating even if shorted
The rugged steel case is finished in enamel and provides shielding from electrostatic interference
Includes a plug-in power module that attaches to the electronics module with a 6' cable
Number of Channels 1
Regulated Output Voltage 48V ±2V DC
Short Circuit Output Current 14 mA
Residual Output Noise -71 dBV
Frequency Response 10-25,000 Hz
AC Input AT8801: 100-120V AC, 50-60 Hz, 2 W max.
AT8801/EU: 230V AC, 50 Hz, 2 W max.
AT8801/UK: 240V AC, 50 Hz, 2 W max.
External Power Supply AT8801: UL and CSA-approved AC power module with 6' (1.8 m) cable.
AT8801/EU: CE and TUV-approved AC power module with 6' (1.8 m) cable. Input: Two 4 mm dia. pins, 19 mm apart (CEE 7/16 "Europlug").
AT8801/UK: CE and TUV-approved AC power module with 6' (1.8 m) cable. Input: Three-pin BS 1363 connector for UK/Ireland.
Dimensions 5.12" (130.0 mm) W x 2.36" (60.0 mm) D x 1.73" (44.0 mm) H typical
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.