0 items in your cart
This website uses cookies to help improve your online experience. If you continue without changing your cookie settings we'll assume that you are happy for this website to use cookies. Find out more about our cookies. Hide this message.

Audio-Technica AT4050ST Stereo Condenser Microphone Stand With AT8449 Shock Mount

Product Code AUAT4050ST
Manufacturer Audio-Technica

Buy this from the A.C. Audio Online Store. Request more information or contact us now for purchasing information.

Description

Offering the realism of a live sound field, the AT4050ST is a side-address condenser with cardioid and figure-of-eight elements configured in a Mid-Side arrangement. This innovative stereo condenser allows sound recordists the choice of selecting a left-right stereo output or choosing discrete Mid-Side signals for later manipulation, a remarkable flexibility. The microphone's dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range. Its transformerless circuitry virtually eliminates low-frequency distortion.
•Innovative side-address Mid-Side stereo microphone engineered for professional recording, broadcast and sound reinforcement
•Independent cardioid and figure-of-eight condenser elements
•Switch selection of Mid-Side mode and two internally matrixed stereo modes
•Dual-diaphragm capsules maintain precise polar pattern definition across the full frequency range of the microphone
•Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
•The 2-micron-thick, vapor-deposited gold diaphragms undergo a five-step aging process so that the optimum characteristics remain constant over years of use
•Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
•Integral 80 Hz high-pass filter switch and 10 dB pad switch
•State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
•Custom shock mount provides superior isolation

Specifications

Element: Externally-polarized (DC bias) condenser
•Polar Pattern: Cardioid and Figure-of-eight
•Frequency Response: 20-18,000 Hz
•Low Frequency Roll-off: 80 Hz, 12 dB/octave
•Open Circuit Sensitivity: Stereo 90°: -42 dB (7.9 mV) dB re 1V at 1 Pa
Stereo 127°: -41 dB (8.9 mV) dB re 1V at 1 Pa
Mid: -36 dB (15.8 mV) dB re 1V at 1 Pa
Side: -36 dB (15.8 mV) dB re 1V at 1 Pa
•Impedance: 50 ohms
•Maximum Input Sound Level: Mid and Side: 149 dB SPL, 1 kHz at 1% T.H.D.;159 dB SPL, with 10 dB pad (nominal)
•Noise: Stereo 90°: 25 dB SPL
Stereo 127°: 16 dB SPL
Mid: 15 dB SPL
Side: 17 dB SPL
•Dynamic Range (Typcial): Mid: 134 dB, 1 kHz at Max SPL
Side: 132 dB, 1 kHz at Max SPL
•Signal-to-Noise Ratio: Stereo 90°: 69 dB, 1 kHz at 1 Pa
Stereo 127°: 78 dB, 1 kHz at 1 Pa
Mid: 79 dB, 1 kHz at 1 Pa
Side: 77 dB, 1 kHz at 1 Pa
•Phantom Power Requirements: 48V DC, 6.4 mA typical (both channels total)
•Switches: 90°, 127°, M-S; Flat, roll-off; 10 dB pad (nominal)
•Weight: 517 g (18.2 oz)
•Dimensions: 193.0 mm (7.60") long, 53.4 mm (2.10") maximum body diameter
•Output Connector: Integral 5-pin XLRM-type
•Cable: 5.0 m (16.5') long, 8-conductor, shielded, vinyl-jacketed stereo cable with 5-pin XLRF-type connector at microphone end and two 3-pin XLRM-type connectors at output end
•Accessories Furnished: AT8449 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; microphone dust cover; protective carrying case
•Audio-Technica Case Style: R1

Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.

E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.

Downloads

No downloads

No related products

No accessories

A.C. Audio Online Shop