Apart MICPAT-4 Sturdy 4 Zone Dynamic Paging Microphone
Selective 4-zone paging station
The Apart MICPAT-4 is a sturdy active multizone-paging microphone. It has a flexible gooseneck and a high-quality directional condensor microphone.
With MICPAT-4 you can make paging calls to a maximum of four zones simultaneously. It has been designed specifically for use with the Apart ZONE4 pre-amplifier and future models. Multiple MICPAT-4 mics can be connected in parallel by using the optional RJ45SPLIT splitter.
Operating this microphone is very straightforward: select the zones you want to page by pushing buttons 1 to 4. You can select all zones at once by pushing the ‘all' button. The call button is momentary: push to talk. All the other buttons are latching. During paging the call LED will light orange, and all other microphones connected in parallel will be temporarily disabled (busy). In a multi-microphone setup, the MICPAT-4 will automatically detect if another microphone is already paging. This is indicated by an orange call LED. When paging has ended, the LED will return to green.
MICPAT-4 and ZONE4 have an easy plug-and-play installation and comfortable, intuitive use. As all Apart products, they have been designed with installer ease in mind!
|active||Yes||polar pattern||directional, low feedback, electret capsule|
|buttons||4 selection + Call + All Call||indicator||1 per button + multi color status|
|zones||4||frequency range||80 Hz - 20 kHz|
|nominal output level||2 V balanced||rated output impedance||50 balanced ohms|
|power type||Phantom||mic stem lenght||275 mm|
|connector||RJ45||cable lenght||5 m|
|cable type||CAT5||width||115 mm|
|height||60 mm||depth||162 mm|
|weight||550 gr||Net weight product (kg)||0,70|
Equipment available to buy from this site is for professional use only. Please note in certain countries some products listed may not be available from A.C. Entertainment Technologies Ltd.
E&OE. Information is subject to change without notice. The rights and ownership of all trademarks are recognised.